Plastic Drum Extrusion Blow Molding Machine 25L 30L

Packaging Details

If you are looking for more details, kindly visit YOULI.

1.The machine body is covered by waterproof film firstly, and then fixed on exported wooden pallets with bolts and wires.
2.The electric controlling parts and spare parts are loaded separately in wooden box.
3.The auxiliary equipments are packaged in wooden box as well.
4.All wooden material is fumigation certificated and safe for exporting to all over the world.

Contact us to discuss your requirements of 25L Plastic Extrusion Automatic Blow Molding Machine. Our experienced sales team can help you identify the options that best suit your needs.

1. The screw adopts high potency melt to make sure the material well mixed.

2. Adopt frequency control of motor system to reduce the power consumption.

3. Adopt horizontal movement frame to improve stability and speed.

4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.

5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.

6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.

7. Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.

8. The precise time control system assured good quality, suitable weight and reduces production cycle.

9. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.

10. Multi-function bottom blowing type for shaped products. unit item specification discription Product Volume Max. 30L Single station, single die-head Extruding
  Screw diameter Φ80mm Mixing model Screw L/D 25:1   Material of screw and barrel   38CrMoALA Plasticizing capacity 110KG/Hr Based on HDPE , change with material density Extruding method Gear box and strap Hardness tooth surface gear box Driving power 37KW With transducer Screw revolution  10-70V/min   Heating zones 4 Temperature module, Mitsubishi  Blowers 4 Power 120W Cooling Yes Cooling water for feeding zone and gear box Clamping system  Structure
  Tie-barless Without bar, bilateral synchronization center-mold closing, with large and average clamping force Mold-moving guide Ball bearing beeline guide Small resistance, high speed, high precision, scuff resistance Idle cycle time 400 pc/h   Platen dimension 680×750 mm Max. Platen distance 420~920mm   Clamping force 250KN   Fixing mold Mold pressing platen   Clamping stroke control Inductive switch & moving Discriminate end of mold opening, low-speed of mold opening, end of mold closing and low-speed of mold closing Die-head Structure Continuous Hill and dale, first-in, first-out Material   38CrMoALA inner mirror  Die mouth Φ80~Φ280 mm   Heating method   Stainless steel band Heating zones 4   Die-head blowing Yes   Parison thickness controlling Available MOOG 100-point Injecting stroke control   Accumulator electric ruler & limit switch Parison adjustment method Inner mandrel   Adjustment  ±2mm   Top blowing device Blow pin stroke control Inductive switch Discriminate end of blowing pin up, end of blow pin down Blowing control mode   Discriminate high pressure blowing and low pressure blowing Blowing pin cooling function Cooling water First-in, first-out cooling system
  Blowing pin position adjusted   Front, back, left, right, three way displacement adjusting Take-out robot Driving mode FESTO Germany Guide control
  Ball bearing beeline guide Small resistance, high speed, high precision Controlling system Temperature Module Mitsubishi Programmer Mitsubishi The movement programmer composed in general language, and movement control may be revised according to the users' special demand Operating screen Human interface screen HITECH, Taiwan Timing setting Touch screen Set pressure and timing on the screen to manage and control the movement  Hydraulic Oil motor power 22KW   Brand DENSION America Controlling Proportional Setting data from 0 to 999 Max. working pressure 140 kg/cm2   Pneumatics Direction FESTO Germany  Pressure controlling   Separate two adjusters for high and low pressure Max. pressure 8kg/cm,1.3m3/min  All air pipes are connected by PU pipe Other information
  Lubricities method   Auto lubricate oil pump except switch mold basement Oil cooling   Using heating exchanger from Taiwan Mold cooling   Separated cooling water resource, use 5-in 5-out fix (single side) Gear box, hopper basement, die head cooling   Use separated cooling water circuit, insure cooling effect Overall dimension L*W*H **mm Weight TON 13.0T
Any question,please call me. 
MOB&waspp: +

Hot sale 25L plastic blow molding machine1. The screw adopts high potency melt to make sure the material well mixed.2. Adopt frequency control of motor system to reduce the power consumption.3. Adopt horizontal movement frame to improve stability and speed.4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.7. Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.8. The precise time control system assured good quality, suitable weight and reduces production cycle.9. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.10. Multi-function bottom blowing type for shaped products.Any question,please call me.MOB&waspp: +

For more Fully Automatic Plastic Bottle Making Machineinformation, please contact us. We will provide professional answers.