3D Concrete Printing — CyBe Construction

We strongly believe that one integrated system combining hardware, software and material is key in achieving the best results for 3D concrete printing for several purposes.

Wall elements – Within our Lyve concept our team of designers and architects has developed various designs that are easy to build using the various 3D concrete printing technologies. The method of printing with the CyBe Robotic-line (R-line) printers is done by dividing the design into wall elements. All these wall elements can be printed within 2 to 3 days. After this the next phases of the construction can immediately be done; e.g. roof and water- & air- tightening of the building, placement of doors & windows, the installation of mechanical & electrical services and public sanitation & hygiene facilities.

CyBe’s principle is to optimize any design to the local regulations, requirements and expectations. As a result it is possible to optimize any concept in insulation, wall thickness, structural principle and local special requirements such as earthquake regulations.

Modular construction – Our patented concept of Prefabricated Prefinished Volumetric Construction (PPVC) is a construction method we have developed for our CyBe Gantry-line (G-line) printers. This concept consists of free-standing 3-dimensional modules that are completed with internal finishes, fixtures and fittings in an off-site fabrication facility, before it is delivered and installed on-site. We created a living solution that helps you and your environment, as this way of construction we can cut down the cost of gas, water and light to a minimum.
Artificial reef – Our range is not limited to 3D printers for building houses only, as our printers serve various markets such as coral reef restoration; An incredible solution for our oceans’ main problems. Artificial reefs can produce rapid increases in the growth of algae, coral, and local fish populations. Our material has shown great results of containing certain elements like coral, because of the roughness of the material.

Manholes – The use of the 3D concrete printing technology for the production of manholes has many benefits. For example, the production time of 3D concrete printed manholes is a lot quicker than traditional because of the fast curing time of the CyBe Mortar. The manholes can be measured by the printing equipment, shared with the printer software and printed within 1 to 2 hours. As a result, this will minimize the required materials and labor costs and will maximize the production.

Street furniture – The concrete 3D printing technology enables us to offer a variety of efficient, quick, sustainable and affordable solutions for not only construction projects, but also landscaping projects. Both applications can be done with the same printer.
Art – Another benefit of the 3D concrete printing technology is the design freedom, which makes it also perfectly suitable to create art and abstract design without the need for costly molds.