Dear Lifehacker,
I have a ton of chargers laying around from various cell phones and laptops I've owned over the years. They all seem to work fine enough, but after reading about the woman who was electrocuted by a charger I got a little scared. Does it matter which charger I use?
Sincerely,
Veronica Voltage
Dear VV,
We're certainly no strangers to having a million chargers sitting around. The short answer to your question is, yes, the charger does matter, even if the charger fits. How much depends on what you're charging though.
The first thing you really need to consider when you're grabbing a charger is the most obvious: if the connector fits. That means the plug on the end of the charger actually fits into your gadget properly.
For something like a cell phone, this is usually a USB cable (of which various sizes exist), unless it's an Apple device with a special 30-pin or Lightning connector. Older phones might have a cylindrical connector. Likewise, laptops have all kinds of connectors, and many of them are proprietary to the manufacturer. In some cases, you'll need to order a special charger just for your device.
What all this means is that if you have a charger that fits into your gadget, you're on the right track, but you're not done yet. It's time to look at the technical details.
After you've figured out that you can actually connect the charger to your gadget, you need to figure out if doing so will make it explode or not. This means checking the voltage and amperage on your charger to make sure it'll work with your device.
On most chargers you'll find the voltage listed somewhere on the power brick. Voltage is what pulls energy into the device. If the voltage is too high, you might end up shorting out your devices because you'll overload the circuits. For mobile phones and other mobile devices like the Kindle that charge with USB, the voltage is typically 5V. A laptop charger might be as high as 20V or 25V. You can usually find the voltage your device needs on the device itself, on the battery, or if all else fails, on the manufacturer's web site. You'll almost always find the voltage supplied by your charger on the charger itself. You want the the voltage on your device to match the voltage provided by the charger.
Likewise, amperage is just as important. Amps are the current that's supplied to your device. Think of it like a river, and the amperage is how fast that river is. Amps are usually listed on your power supply as something like, 2.7A or 1A. This regulates how much power flows through from the power supply to your device. The amperage listed on your power supply needs to match or exceed the amperage required by your device.
As Popular Mechanics points out, there's a bit more to picking the right charger, but for most of us voltage, amps, and watts all we need to consider. As Extremetech points out, if you're using a USB charger it doesn't really matter because they're almost all the same, but it's still worth double-checking to make sure you're in the clear.
Chargers can be expensive for no good reason, but you're better off sticking with official chargers or off brand chargers as opposed to knockoffs.
The reason is that counterfeit and off brand chargers are poorly made, and that means they put your device (and your house) at risk. Many ignore safety standards completely, but they also just don't charge your devices that well because they don't push the amount of power they're supposed to. This means you're spending more time with these devices plugged in, which causes a larger risk to your safety, as well as your device.
That's about it. If you pick the right charger, your devices will charge as quickly as they're supposed and your house won't burn down.
Good luck,
Lifehacker
Have a question or suggestion for Ask Lifehacker? Send it to [email protected]
Photos by ninsiri (Shutterstock), nemo, fsse8info, fsse8info, matthew venn.
Want more information on wholesale phone chargers? Click the link below to contact us.