The sealed lead acid battery is by far one of the most popular batteries that we receive questions on here at High-Tech Battery. I have decided (finally) to post a few of the most common questions that I hear from customers regarding sealed lead acid batteries here in our Battery Information Center, so here it goes.
What exactly is a sealed lead acid battery?
A sealed lead acid battery is what is originally known as a VRLA battery, or a valve regulated lead acid battery. These batteries are a 100% rechargeable, and based off a lead acid design. These batteries are designed to be maintenance free (do not require the user to add water to the cells), and spill proof. These batteries can be mounted in any position and still operate to their full capacity without spilling a drop of acid.
You may be wondering where exactly the valve regulated part of the sealed lead acid battery comes into play. Every SLA (sealed lead acid) battery is designed with a special safety release valve. These valves act as a emergency pressure release system that activate to alleviate the build up of gases within the SLA battery. During a period of an extremely high rate of charge (extreme over-charging), gases will be generated inside the battery that could potentially build up to critical levels and force its way out - via exploding a side of the battery out, or a simple crack in one of the cell dividers. To prevent this from happening, all SLA batteries are designed with these small pressure release valves.
Are there different types of sealed lead acid batteries?
Yes, there are two different types of SLA batteries out on the market today - AGM, and GEL batteries.
AGM batteries utilize a special plating process which optimizes the effectiveness of electrolyte reaching the batteries lead plates. AGM stands for absorbed glass mat, which is essentially what the entire process consists of. A mat consisting of very thin glass fibers woven together is placed between the internal lead plates of the battery. This glass mat is capable of absorbing and holding the optimum amount of electrolyte between the plates for the lifetime of the battery. This technology cuts down on the use of electrolyte and increases the efficiency and power of the battery.
The infamous GEL battery (confused with AGM SLA batteries on a daily basis) utilize a special gel based mixture between the plates of the battery instead of the typical electrolyte found in the common flooded lead acid batteries (think car battery). In this case, the gel is a combination of silica fume and standard sulfuric acid to create a type of gelified electrolyte. This design enables the battery to suffer much less internal corrosion, thus increasing the overall life of the battery - assuming you take care of it properly
Want more information on 12V 150Ah Front Terminal Sealed Lead Acid Battery, Front Terminal Batteries, Kete battery? Click the link below to contact us.