two things come to mind:
basement plumbing fixtures that require a sewage ejector pump to get sewage up to the level of the gravity flow plumbing system. the sewage ejector pump should be accessible (or maybe visible) in the basement
or
a pressure distribution septic system which uses a pump to pressurize the effluent into the septic field. generally you have two exterior below grade tanks - the typical septic tank where solids settle with flow being under gravity conditions into and out of the septic tank. flow then goes to the pump tank where your septic pump is located. generally the pump is on a float so that fluid collects and then gets pumped out to the field all at once under pressure. By "dosing" the field in this manner it allows it to rest in between and not have constant flow like in a gravity system and since its under pressure it equally distributes the flow throughout the field rather than concentrating near one end like in a gravity system. this is a superior system to the typical gravity based tank and field. should have two exterior tanks both with access lids outside with this type of system.
Our simplex pump systems can be utilized as residential lift stations and also in light commercial applications. These lift stations are designed to transport water, effluent, and sewage to a higher location when gravity flow systems will not work. We have many sizes of fiberglass and polyethylene plastic tanks available and many different submersible pumps that can be used. Below are our most popular sizes, but if you do not see what you need give us a call at 1-877-925- and we can design a custom sewage lift station specifically for your application!
Our simplex pump systems can be utilized as residential lift stations and also in light commercial applications. These lift stations are designed to transport water, effluent, and sewage to a higher location when gravity flow systems will not work. We have many sizes of fiberglass and polyethylene plastic tanks available and many different submersible pumps that can be used. Below are our most popular sizes, but if you do not see what you need give us a call at 1-877-925- and we can design a custom sewage lift station specifically for your application!
Our Simplex Pump Stations are custom built to our customers' site specific needs. Therefore it is considered a "Custom Product" and cannot be returned for a refund. See our Return Policy for more details
If you are looking for more details, kindly visit Anhui Tian jian.
The pump stations offered by Septic Solutions can be used for residential, commercial, and light industrial applications. We offer lift stations for sewage (black water), effluent (grey water), and drainage water (clear water) removal.
The term Simplex Pump Station indicates a lift station with a single submersible pump. We build our pump systems with Liberty and Little Giant submersible sewage and effluent pumps. Our fiberglass pump vaults come in 70 Gallon, 200 Gallon, 300 Gallon, and 500 Gallon sizes. We also have polyethylene plastic basins available in 100 gallon and 140 gallons. Septic Solutions builds the pump station to order, so we can use any combination of pump and fiberglass or poly tank.
Both the fiberglass and polyethylene pump vaults are strong for direct burial without any special fill, but are lightweight and easily handled by a person or excavator. This makes for very easy installation. When you receive a simplex sewage lift station from Septic Solutions, it is completely assembled and ready to install.
For more information, please visit Commercial Sewage Lift Station Pumps.