metal straightening feeder with decoiler
Check now
3 in 1 precision NC servo straightener, feeder and uncoiler, PLC control, best electric parts, can be used with mechanical press for auto production punching and stamping lines.
I.Feeding feature by PLC program from MITSUBISHI
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan.
The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder,interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.
4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max .99mm. speed max 100m/min
II. Straightening feature
1.3 in 1 uncoiler and straightener saves space and increase productivity.
2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.
3.Feed and straightener roll with a hard chrome plated.
4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.
5.Electric loop control system.
6.Power hold down arm device
7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.
8.Feeding line easily adjusted by advance worm gear screw Jacks device
9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,
10.Coil side guide
11.Outgoing catenary to assist and support the material
12.A Clusster gear set maximizes transmission of horse power.
13.Transformer
Specifications:
Item/Model
TNCF2-300
TNCF2-400
TNCF2-500
TNCF2-600
TNCF2-700
TNCF2-800
Width of Material(mm)
75-300
75-400
75-500
75-600
75-700
75-800
Thickness of Material(mm)
0.3-2.3
Max. Coil Weight(kg)
2T
3T
5T
weight can be customized
Coil L.D.(mm)
508
Max. Coil O.D.(mm)
Max.Speed(m/min)
16
Feed Pitch Accuracy(mm)
±0.15
Feed ROLL
Upper1 / Lower1
Straighten ROLL
Upper5 / Lower4
Voltage
380VAC / 60Hz
Air power supply
5kg / CM²
Uncoiler Expansion
Hydraulic
Servo Motor(kw)
AC1.8
AC2.9
Uncoiler Motor(kw)
1.5 KW
2.2 KW
Coil Car
optional
Pass line
±100 MM
Item/Model
TNCF3-300
TNCF3-400
TNCF3-500
TNCF3-600
TNCF3-700
TNCF3-800
TNCF3-
Width of Material(mm)
75-300
75-400
75-500
75-600
75-700
75-800
75-
Thickness of Material(mm)
0.4 - 3.2
Max.coil Weight(kg)
2T
3T
5T
Coil L.D.(mm)
508
Max.Coil O.D.(mm)
Max.Speed(m/min)
16
Feed Pitch Accuracy(mm)
±0.15
Feed ROLL
Upper1 / Lower1
Straighten ROLL
Upper5 / Lower4
Upper4 / Lower3
Voltage
380VAC / 60Hz
Air power supply
5kg / CM²
Uncoiler Expansion
Hydraulic
Servo Motor(kw)
AC1.8
AC2.9
AC4.4
Uncoiler Motor(kw)
1.5 KW
2.2 KW
Coil Car
optional
Pass line
±100 MM
3 in 1 precision NC servo straightener, feeder and uncoiler, PLC control, best electric parts, can be used with mechanical press for auto production punching and stamping lines.I.Feeding feature by PLC program from MITSUBISHI1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan.The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder,interface screen and so on.2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max .99mm. speed max 100m/minII. Straightening feature1.3 in 1 uncoiler and straightener saves space and increase productivity.2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.3.Feed and straightener roll with a hard chrome plated.4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.5.Electric loop control system.6.Power hold down arm device7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.8.Feeding line easily adjusted by advance worm gear screw Jacks device9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,10.Coil side guide11.Outgoing catenary to assist and support the material12.A Clusster gear set maximizes transmission of horse power.13.TransformerSpecifications:
Lihao Machine are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.