If you want to learn more, please visit our website.
Metso sells conveyor pulleys in all the following sub-categories:
Head pulleys
The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).
Tail and wing pulleys
The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.
Snub pulleys
A snub pulley improves the traction of the drive pulley, by increasing its belt wrap angle.
Drive pulleys
成钢 supply professional and honest service.
Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.
Bend pulleys
A bend pulley is used for changing the direction of the belt.
Take-up pulley
A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.
Conveyor pulleys are designed for use on conveyor belt systems to drive/redirect the conveyor belt on its system through tension that is created.
All conveyor systems will include at least two pulleys: a head pulley and a tail pulley. The additional pulleys are dependent on the application requirements.
These additional pulleys include snub, drive, bend and take-up pulleys. Truco is a supplier of all conveyor belt pulley variations.
If you are looking for more details, kindly visit Pulley for Conveyor Belts.