In this article, we are going to discover what an industrial boiler is, and how it works.
But first, let us consider the term heat. Heat is vital in everyone’s day to day lives. Whether it be heat to warm up our surroundings, or heat to be able to cook food, we all use it to some extent in our day to day activities.
Water and steam are great heat carriers and are not damaging to our environment. The boiling point of water at atmospheric pressure is 100°C or 212°F.
By pressurizing the boiling system by giving it an airtight seal, we can actually increase the boiling point. This is how pressure cookers work. An airtight vessel to increase the pressure to increase the boiling point. This makes the food cook in a much shorter time than if an open saucepan were to be used.
So how does this compare with an industrial boiler?
Well, for a start, industrial boilers can cope with pressures much higher than a pressure cooker.
Industrial boiler systems are often made by welding together thick steel plates, allowing extremely high pressures to be made.
It has to be made incredibly strong to cope with the high pressure, as failure to do so will result in forces close to an exploding bomb!
The function of a boiler is to either produce hot water or steam.
Hot water boilers heat water for the purpose of domestic or commercial heating and hot water supply.
Steam boilers generate steam in order to power turbines for power generation and various other industrial heating applications.
To visualize the effects of steam generation using a boiler, think of the steam powering a turbine. When the steam passes through the blades of a turbine, the force turns the blades and accelerates the turbine.
Steam contains an enormous amount of energy, so it makes the turbine quite efficient and depending on the fuel used to boil the water, quite energy efficient too.
There are different types of boilers for all sorts of different applications.
We are going to cover a couple of the different types, including how each of the methods is able to generate heat, so you can familiarise yourself, and be able to correctly identify them.
The typical make up of a Fire-Tube boiler is:
– Furnace
– Water tank acting as a boiler
– Smokestack
There are tubes running through the water tank carrying the heat from the furnace, and the smokestack vents the heat and gases caused by the heating effect so that the pressure does not continue to rise above the intended level.
So, the fuel is burned inside the furnace. The tubes transfer the heat of the furnace through the water in the tank. Once it is heated, the steam generated is moved along downstream.
Fire-tube boilers tend to be the cheapest type of boiler to produce, as they have a fairly simple construction but are typically limited for low to medium pressure applications due to the thickness of the outer shell containing the water.
Now that we have covered the fire-tube boiler, let’s have a look at a water-tube boiler.
The design is fairly similar to a fire-tube boiler, but instead of the furnace heating fire tubes to heat water in a tank, the furnace heats water tubes inside the furnace.
In the same way, a fuel source is burned in the furnace, causing the water tubes inside to heat up. Once again, when the water is boiled, steam is generated and moved downstream.
A water-tube boiler is more thermally efficient than a fire-tube boiler, but they are more complex to construct and the quality of the water can be a limiting factor.
The water may need filtering to operate most effectively.
Combustion is the process of burning a fuel source. To create a reaction, there must be a fuel source, heat, and an oxidizing agent.
Boilers can be designed to burn a specific fuel, using any number of different technologies, but the main component to consider here is the heat source, or otherwise known as the fuel.
The fuel is one of the most important aspects of a boiler and is what burns inside the boiler to generate the heat.
There are many different sources that can be used.
Coal is a standard fuel source. In industrial boiler applications, the coal tends to be ground to a fine powder as it burns more completely than traditional bricks.
Electric can be used as a heat source, either by resistance heating coils or electrode units. Electric would normally only be used for smaller commercial or domestic use.
Electrode type applications require very high water quality and conductivity to work effectively.
Maintenance is key to electrode type applications too, as cleaning the insulators is required to prevent arcing between the electrodes.
Gas-fired boilers work by using either propane or natural gas, whereas oil-fired boilers work using gasoline or petroleum-based fluid.
There are so many different applications that boilers are used for.
They are used in the food industry. Food, at various stages of production, needs to be heated or boiled as it is processed. An interesting use of boilers is in the brewing of beer!
During the beer brewing process, the malt needs to be ground and mixed with water, a process called mashing. This ‘mash’ is then heated, using steam, for several hours before the yeast is introduced to trigger the fermentation.
So let’s recap a few of the things we have learned in this article.
Boilers are an extremely versatile and important piece of engineering equipment, not only for us on a domestic level but at a commercial and industrial level too.
To generate heat, we need a fuel source. The reaction of having a fuel source, heat and an oxidizing agent allows for a reaction to take place. This keeps the heat source going.
By heating tubes of water, and using fire tubes to heat a tank, steam is produced at extremely high pressures to produce enormous amounts of energy!
We hope you enjoyed this short introduction to Boilers.
Here at RealPars, our team of experts is on hand to answer your questions and respond to your feedback. We’d love to hear your suggestions for topics you want our team to cover.
Got a friend, client, or colleague who could use some of this information? Please share this article.
Happy learning,
The RealPars Team
If you have any questions on steam boilers types, wall mounted boiler. We will give the professional answers to your questions.