Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
Click here to get more.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
&#;Great fences make for great neighbors.&#; While not everyone may feel this way, finding a quality fence that is also affordable can be difficult. That is why we are excited that many people are looking into metal panel fencing as the solution to their fencing needs.
You may be wondering, &#;What in the world is metal panel fencing?&#; well, here at Wagler Steel, we are happy to help answer your questions about this and all things metal panels. So buckle up and let&#;s get into all the questions about metal panel fencing.
Overall, steel metal panels are the most affordable metal panel fencing type.
Some people feel that aluminum panels are a bit more cost-effective, but that is generally not the case.
If you want a specific color, you will have to paint the aluminum panels yourself, which can make it very difficult to get the desired overall appearance you are going for.
All of this leads to an overall increase in price. This brings us back to steel metal fencing panels being the best in overall cost.
Not only that, at Wagler Steel, we have over 20 colors in three finishes as well as panels that are finished to look like wood.
Yes. Metal panel fencing is more affordable than wooden fencing in the long haul, especially when you consider that metal fencing also lasts longer. If you are looking for the cheapest fencing option possible, there are some cheap wood fences that could be a solution for you. It will be a cheaper upfront cost but will not last as long as metal fencing. If you get a higher quality wooden fence, you will pay the same or more as a metal panel fence.
Typically, metal fencing panels come in 3&#; wide sections that cost less than $24.00 per a 6&#; tall section. This means 9&#; of fencing coverage will cost you about $72.
On the other hand, wooden fencing that is 6&#; tall and 8&#; wide will run you about $67 a section of fencing.
At first glance, you may think that our math is off $67 is certainly cheaper than $72. But lets break that down into price per a foot width.
Wooden Fence: 8&#; wide : $8.37/per foot wide
Steel Fence: 9&#; wide : $8.00/ per foot wide
As you can see, steel fencing panels are cheaper than wooden fencing panels when you break it down to cost per foot.
Yes. Metal panel fencing can come in custom lengths for your fence. However, the minimum length that a metal fencing panel can be cut is 2&#; long. On the other hand, you can have your metal panel cut up to 30&#; in length. However, if you need a 30-foot-tall fence for privacy, you may be better off moving away from those neighbors.
Metal panels, when used as fencing, are rated for use for 40 years by the manufacturer. This means that you can rest assured that your fence will stand the test of time. Our metal panels are well-designed and well-built, giving you the high-quality product you need. Not only do our panels last a long time, we also will work to resolve any issues a customer may have with blemishes in the panels.
However, if you are planning to use these panels as fences for livestock, any damage that comes from the livestock will void the warranty. This is one reason we do not recommend using metal panels around your cattle or when creating a tack barn.
Metal fencing panels are available in over 20 colors, two finishes, and two wood look-alike finishes. We believe having a quality metal fence that matches your property and home makes your property all come together.
Finally no more setting for a fence that just &#;works&#;; make one that looks good as well!
Yes! At Wagler Steel, we offer 2 wood look-a-like metal panels. They are designed to give the look of wood panels but with the durability and toughness of steel. The panels can be used as fencing and siding, which means that you can have a building that totally matches from siding to fencing.
The Wagler Panel form roll is the best panel for metal panel fencing. This panel is the most rigid, allowing it to withstand the most difficult fencing situations. Another reason this form roll is so popular is that this form roll is available in all of our colors.
Another recommendation we have for metal panel fences is the Paradise Panel. This panel is also very sturdy and will make your fence look good as well. If you have any questions regarding what is best for you, contact us, and we will be happy to help you!
In our experience, 28 gauge metal is the best gauge for metal fencing. While we offer thicker metal gauges for our Standing Seam panels and Board and Batten panels, those form rolls need the extra thickness to function properly. Since those form rolls are not well suited for fencing, the added gauge will not be of any benefit.
30&#; is the longest continuous piece of metal that we can cut for a metal fence panel. Because of this, you could make your fence as tall as you would like with the proper bracing. However, most municipalities do have restrictions on how high your fence can be. Because of this, we recommend that you check your zoning ordinances.
Most people make fences between 6&#; and 8&#; tall. If you are unsure of how tall to make your fence, we recommend going with this height for several reasons, including the fact that it is easy to work on. As you increase the fence height, the more difficult it is to install. Additionally, higher fences require significantly more bracing.
Metal panel fences may get hot depending on where you are located and what time of year it is. In our service area, you won&#;t have to worry about your fence becoming hot, but it may become warm. Additionally, the temperature of your fence will be dependent on the color of fencing that you choose.
Galvalume Steel is the best metal for metal panel fencing. We know this sounds a little biased as we sell steel panels. However, when you look at other products that are available on the market, they are either cheaply constructed products, very costly, or do not provide total privacy.
Possibly, it depends on how you install your metal panel fencing. Some people may be okay with the &#;bare edge&#; of the panel or will use a piece of wood to be the top edge. On the other hand, some people have used J-Channel to run along the edge of the top to cap off the fence.
Yes, you will need some wood to install your metal panel fencing. You will need far less wood to create a metal panel fence than you would need to complete a wooden fence. Traditionally, all that you will need for your fence is posts and 3 support boards to give stability to your metal panels.
While installing a metal panel privacy fence may seem complicated, we will break the process down into a step-by-step guide for every homeowner to follow. Before you get started, here is a list of tools that you should have to install the privacy fence.
Materials Needed
Step 1 &#; Prep the Area
Good planning is the key to project success. Once the materials are bought, start by preparing the area to set the posts. Measure and mark where your posts should be placed, and dig holes for each one, preferably around 24&#;-36&#; deep.
Step 2 &#; Set the Posts
Once the holes are dug, mix up the concrete and put several inches of concrete in the hole, then set the 4×4 treated post into it. Fasten a brace to hold the post upright and use the level to make sure that it is exact. Next, pour more concrete around the base of the post. At this point, you can let it dry for several hours before removing the brace and filling the rest of the whole with dirt.
If the ground is unlevel or you find it difficult to make the tops of the posts all level, it may be easier to cut them later. Make sure the post goes higher than you know it needs to be, and it will be cut later to the exact height.
If you are looking for more details, kindly visit WIRSINGTRADING.
Step 3 &#; Fasten the Horizontal Supports
Once the posts are set, the horizontal 2×4 supports can be put installed. These will run from post to post horizontally to the ground every 2&#; or 3&#;, and this is where you will fasten the metal later.
Start by fastening the top 2×4 board along the top of the fence. This board should be several inches below where you want the top of the fence to be. If this row of boards is level, then you can measure off of the it for the rest of the rows.
Once this row is fastened with 3&#; screws, measure how high you want the top of the posts to be and cut them off with a saw.
Space at least two more rows of 2×4 boards evenly below the first row that is already installed.
Step 4 &#; Attach Metal Panels
Now that the framework is up, the metal panels can be attached. Install a piece of J-channel on whichever side you begin. Starting there, attach the first metal panel with tin screws every 8&#;-12&#; along each 2×4 board. Overlapping one rib, continue installing the metal panels until you reach the opposite side.
Step 5 &#; Fasten J-Channel
Once all the metal panels are installed, finish off the end with a J-Channel to give it a nice finished look. Then, run J-Channel along the top of the metal panels, fastening them on the posts. This will cap the top nicely.
The second method from the video above uses lumber to finish off the edges. Below is a step-by-step guide on how to create a privacy fence similar to the one mentioned in this video.
*We do not offer corrugated metal panels. This video intends to show you how to create a metal panel fence style. You could use our Wagler Panel in Galvalume finish to give you a fence that is similar in appearance.*
Here are some tools that would be used in this project:
Materials Needed
Step 1 &#; Prep the Area
The first two steps of this guide are the same as the one above. Once you buy your materials, start by preparing the area to set the posts. Measure and mark where your posts should be placed, and dig holes for each one, preferably around 24&#;-36&#; deep.
Step 2 &#; Set the Posts
After digging the holes, prepare the concrete and pour a few inches into each hole. Set the 4×4 treated post into the concrete, securing it with a brace to maintain an upright position. Use a level to ensure precision. Add more concrete to the bottom &#; of the hole, allowing it to dry for several hours before removing the brace. Fill the remaining hole with dirt and tamp it down. .
If the ground is uneven or leveling the tops of the posts proves challenging, consider cutting them later. Ensure the posts extend higher than necessary, allowing for adjustments to the exact height during the cutting process.
The more level your fence is, the easier it will be to install the metal panels.
Step 3 &#; Add the Horizontal Framework
Begin with fastening the top row of 2×6 treated boards onto the front face of the post where you want the top of the fence to be. The metal will be fastened to the back side of this board. Use the level to make sure that these boards are straight. Once this first row is attached, cut off the posts flush with the top edge of the board. This will allow you to cap the top of the fence with another 2×6 board.
Add another row of 2×6 boards to the bottom of the fence where you want the bottom edge to be. This, too, should be on the front face of the 4×4 post.
Halfway between the top and bottom boards, install a row of 2×4 boards. Unlike the other boards, this row will be behind the metal and will not be seen from the front. Fasten this row between the posts so the front edge of the board is ¾&#; &#; 1 ½&#; from the front face of the post. The space between should match the depth of your metal panel.
Step 4 &#; Install Metal Panels
Install your metal panels vertically from post to post. The first and last one in each section will butt up to the 4×4 posts. From the front side of the fence, you will be able to see the top and bottom rows of boards, but the middle one should be hidden by the metal as you install it. Fasten the metal panels every 12&#;-18&#; on the top, middle, and bottom boards.
Step 5 &#; Fasten Trim Boards
In order to finish out the fence, fasten a 2×6 board to the top of the fence. This piece should run from the top of one post to the top of the another one and should be flush with the top row of rows on the front side to create a nice finished corner.
Add another trim piece to the front side of the posts. Measure and cut a 2×6 board to fit between the top and bottom row of boards and fasten it onto each post. Space it so it covers the edge of the metal panels on both sides of the post.
With these simple guides, you can soon have your privacy fence installed. With your new durable privacy fence, you don&#;t have to worry about nosy neighbors or people driving past. You can have a property that is for only you and your family.
Wagler Steel is proud to provide the people of Pennsylvania, Maryland, and New Jersey with the best products possible. We believe that a homeowner should be able to install a privacy fence without paying a contractor and waiting until they are available. Make it happen yourself, and give your home some privacy.
Wagler Steel provides several styles of metal fencing, and each one can be used for metal panel fencing. Ultimately, pick the one that you think looks the best or the one that matches your house the best. In each style, we have a wide range of color options, so we can get you the color that you like.
The Wagler Panel is our most popular option and gives a nice finished look. This panel comes with ¾&#; ribs every 9&#;.
The Paradise Panel comes with ¾&#; ribs every 12&#;. In between the ribs is an innovative ribbing design that will make your project look sharp.
At Wagler Steel, we are committed to providing quality products for our customers so that they can do their projects without worrying that they won&#;t be durable. Additionally, we do our best to keep prices as low as we can so customers don&#;t have. to break the bank in order to get things done.
If you have any questions regarding our products, feel free to Contact Us, and we will do our best to help you out. For more information about who we are, visit our About Us page.
For more information, please visit 3d fence panel.