Wholesale Bulk Reflective Sticker Roll Manufacturer

Click here to get more.

Application: Widely used for road signs and urban road signs, industrial safety signs etc.

Product Description of Reflective Sticker Roll

Based on PC/ PET and coated with a permanent pressure-sensitive adhesive, The reflective material which has outstanding reflection function and weather resistance.

PET and PC reflective sheeting vinyl is an advertising reflective materials that are used on a road sign, safety sign, and so on. PET material is very strong and can&#;t easy to tear off. PC material is created easy to tear off, which is used on the small sign advertisement and decoration.

• 1) Highway and city road traffic signs, retro-reflective marking for cars, trucks, ships and other vehicles

• 2) Advertising signs: sign, pop, display

• 3) Personal safety supplies: bicycles, motorcycles, etc

• 4) Vehicle: safety signs and decals

• 5) Industry safety signs

• 6) Parking signs: all construction signs

• 7) Temporary signs and night of physical activity

Marking of Different Vehicle Types

On most European trucks, semi-trailers and trailers, it is easy to apply ECE 104 compliant eye-catching markings; this means that it is easy to find the right place on the vehicle where the tape should be applied, and the application itself is not complicated.

However, on some vehicles, imagining where or how to get the eye-catching tape to make the vehicle compliant can be trickier. Therefore, we&#;ve created an overview of some of the most common vehicle types and provided guidelines on where to apply the tape.

Please note that these are only guidelines and if in doubt, you should always consult your local authority. WEALLIGHT cannot be held responsible for any applications that fail to comply.

1. Car Transporters

Can you mark car transporters?

The answer is yes!

With car carriers, the sides are usually easier to mark with horizontal lines. In most cases, top corners are not possible.

The rear is more complex, but the solution can be to mark the vertical and upper horizontal lines on the rear profile. If the vehicle construction makes marking impossible due to lack of width, there is the option of riveting to the aluminum frame at the corners (see photo) and applying an eye-catching tape to it.

2. Concrete Mixers

Can you mark concrete mixers?

The answer is yes!

Working on the side of a concrete mixer is not easy, but it can be covered by 40% or more with special fittings. In most cases, it is helpful to use a corner aluminum frame (see photo) to rivet it to the vehicle. The tape is then applied to the frame.

The rear can usually be marked with a line marker.

3. Skeletal / Container Chassis

Can we mark skeletal constructions?

The answer is yes!

Application on skeletal constructions (container chassis) is not easy, but according to special vehicle regulations, at least 40% of the sides are usually covered. Usually, it is easy to apply on a 20-foot container carrier and more difficult to apply on a large 40-foot container carrier.

Usually, the rear of the vehicle is OK.

4. Curtain Siders

Can curtain siders be marked?

The answer is Yes!

Application on curtains/tarpaulins is easy. The WEALLIGHT ECE104 Curtain grade tape has been made with a vinyl construction, which allows a sufficient degree of flexibility to follow the flexing and movements of the curtain. The tape comes with either a standard pressure-sensitive adhesive on the back (clean the surface, stick it on!), or a heat-activated adhesive.

The curtain grade tapes are available both as continuous strips or in a segmented version.

A great deal of curtain siders has a rigid structure to the rear. In that case, you should choose a conspicuity tape designed for this type of application.

5. Hook Lifts

Can hook lift be marked?

The answer is Yes!

Although the application of conspicuity markings is not easy on all hook lifts, it is usually possible to cover at least 40% as per the special application authorization. In most cases, a significantly larger percentage can easily be covered.

On the structure above the wheels, it may be necessary to re-apply the conspicuity marking tapes to an aluminum frame which is then riveted onto the vehicle.

6. Special Vehicles

Can Special Vehicles be marked?

Hebei Top Tape supply professional and honest service.

The answer is in most cases Yes!

The category &#;Special Vehicles&#; covers a lot of different vehicle types, and indeed some of these can be more tricky or indeed impossible to apply the conspicuity markings too. However, the majority of these applications are possible.

6.1 Road Sweepers

In the UK and some other countries, road sweepers are equipped with chevron markings to the rear. ECE 104 conspicuity markings can indeed be applied to the rear of these as well. Regulation 48 states that &#;additional retroreflective devices&#; can be applied to a vehicle as long as they don&#;t obscure mandatory devices fit to comply with Regulation 48. In the case of the Chevron, which would be treated as &#;additional&#;, it will not obscure the ECE 104 tape as long as it is applied to the inside of the bumper and as long as the mounting height of tape on the vehicle above the ground is equal or more than 250mm.

6.2 Timber Transporters

Some timber transporters have a rigid structure, which makes side and rear marking possible &#; either directly on the structure, or pre-applied to an aluminum frame. However, for the timber transporters without a bottom structure going to the edge of the vehicle, the application is not considered possible.

7. Flat Bed Trailers

Can the Flat Bed Trailer be marked?

The answer is Yes!

Application on flatbed trailers is quite easy. You do the marking as a line marking, both to the side and to the rear. Upper top corners are not possible due to the trailer construction.

8. Tankers

Can it be marked?

The answer is Yes!

In most cases application on tankers is easy. For the curved rear outline, WEALLIGHT has designed a special version of the pre-cut reflective tape, which we call Pre-cut Tanker Stickers. This product is supplied in a continuous roll, where you peel off pre-cut individual labels (each 16 cm long) which are then easily applied to the vehicle. It is recommended that you start your application by marking the 4 &#;corners&#; (top / 90 degrees / 180 degrees / 270 degrees). You then measure the open space between 2 pieces and calculate how much space you will have between each additional piece.

9. Refrigerated Trailers

Can refrigerated trucks be marked?

The answer is Yes!

Application on refrigerated trucks is easy with WEALLIGHT ECE 104 R Tape.

10. Tippers

Can it be marked?

The answer is Yes!

The application of conspicuity marking tapes to tippers is easy.

11. Rigid Bodies

Can the vehicle body be marked?

The answer is Yes!

Application on rigid vehicle bodies is easy with WEALLIGHT ECE104 Tape. The tape comes with a normal pressure-sensitive adhesive.

12. Refuse Trucks

Can refuse truck be marked?

The answer is Yes!

Application on refuse trucks is easy with WEALLIGHT ECE 104 Rigid Grade Tape.

Need a Hand?

If you&#;re not sure where to attach the marker tape to a specific vehicle, send us a photo of the vehicle and let us work with you to find the best solution.

Contact us today! (Our : [ protected]; /Skype: +86 )

Note: The examples provided in this section are for guidance only. WEALLIGHT recommends that you always liaise with your local authority to ensure 100% compliance with the placement of the prominent marking tape on your vehicle.

Side Markings

Local outline markings for vehicles exceeding 6,000 mm in length fall into the following categories.

• Maximum mass over 7.5 tonnes for N2, maximum mass for N3 (except for chassis cabs, incomplete vehicles, and semi-trailer tractors)

• O3 and O4

The mandatory local contour markings may be replaced by full-contour markings.

Retro-reflective marking strips must be in accordance with ECE 104 &#;C&#; category.

Rear Marking

(a) Complete rear-end profile markings on vehicles exceeding 2,100 mm in width, in the following categories.

Trucks: N2 and N3 with a maximum mass of more than 7.5 tons (chassis cabs, incomplete vehicles, and semi-tractors excepted).

Trailer: o3 and o4 However, line markers may be installed if shape construction, design, or operational requirements preclude the installation of forced contour markers.

Retro-reflective marker strips shall be in accordance with ECE 104 &#;C&#; category.

The company is the world’s best ECE Reflective Marking Sticker supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.