The polyester (EP) rubber conveyor belt is widely used in the bulk material industry. The structure of the polyester rubber belt is comprehensively processed by a multi-layer polyester, that is, EP (or polyester in the warp direction and polyesteramine in the weft direction) according to scientific methods. It is scientifically developed with high-strength and high-strength wear-resistant rubber. So what are the characteristics of this polyester rubber conveyor belt?
Click here to get more.
1. EP conveyor belt has many characteristics such as good elasticity, impact resistance and tear resistance, which can meet the requirements of various complex environments;
2. The EP conveyor belt has a small fixed load elongation. The use of a small elongation polyester canvas conveyor belt has a fixed load elongation performance that is better than other common specifications of fabric core conveyor belts. It can greatly reduce the running stroke during use and is effective. To reduce the overall equipment cost is extremely advantageous for long-distance material transportation.
3. The EP conveyor belt has stronger water resistance. When it is used in a humid and cold environment, the adhesion of the rubber’s comprehensive strength will not be affected in any way, it will still work normally, and it will last longer in the service life;
4. The acid resistance, alkali resistance and heat resistance of EP conveyor belts are excellent. From a long-term perspective, it is more economical to choose ep conveyor belts;
5. The EP conveyor belt has few layers, thin belt body, light weight, strong plasticity during use, etc. It not only improves the conveying capacity but also reduces the power consumption rate of the equipment, and optimizes the transportation radius. Requirements for reducing energy and increasing efficiency;
6. The tensile strength of the cover layer of the EP conveyor belt is higher than 15 MPa, the load elongation is higher than 450 %, and the friction loss is lower than 150mm3;
7. The adhesive strength between the EP strong cloth layers The average value of the longitudinal sample between the cloth layers is greater than or equal to 4.5 N /mm, and the adhesion rate between the covered rubber surface and the cloth layer is greater than 4 N /mm;
8. The overall longitudinal thickness tear change rate of the EP conveyor belt and the full thickness longitudinal reference force elongation have reached international standards.
SUNGDA Conveyor Belt Workshop:
Tags: Ep conveyor belt specification
With competitive price and timely delivery, Huaqiang sincerely hope to be your supplier and partner.
Fabric material used by rubber conveyor belt can be divided into two major types—metal and fiber—in terms of texture. The development of a conveyor belt can do without improvement of fabric material performance. Strength, stretching characteristic, toughness and dimensional stability of the conveyor belt is closely related to the fabric material.
Fiber fabric materials used by conveyor belt mainly are: cotton, polyester, chinlon 6, chinlon 66 and aramid fiber, and other fiber materials are not commonly used.
Cotton fiber, with medium breaking strength, is applicable to produce bottom-weight fabrics with not high strength. As hairiness exists in cotton fiber, it has favorable mechanical adhesive force with rubber, and then fabric material may not go through dipping treatment.
However as natural fiber, price of cotton fiber is high with not high-cost performance; polyamide fiber is of high breaking strength and elasticity, but its modulus is small, and it can extend through creep deformation, so it has been usually used on occasions with short-haul distance, large safety factor and high requirement for elasticity, and chinlon can take its full advantages of low modulus and good trough ability mostly as weft in polyester/polyamide blend-dipping process; polyester fiber is of high breaking strength and high modulus, it will not easily extend through creep deformation, it is the material with the highest strength and best cost performance among all fiber materials at present, so it has been applied to conveyor belt the most extensively.
With favorable weather-proof performance, polyester will not easily be corroded as steel wire or easily be rotted as cotton yarn, in the meantime, it can resist solarization and acid rain, so it is a kind of very ideal material; aramid fiber is of high breaking strength, but it can’t resist compression and dynamic fatigue with high price, and it is limited to a certain degree in application to conveyor belt.
Tags: NN conveyor belt
For more Polyester Mesh Beltinformation, please contact us. We will provide professional answers.