Click here to get more.
On another topicIf he needs 17’ X 11’ Wouldn’t he be 7 squares short if he only ordered 10 sets? I’m thinking he needs 11 sets and then he’d have some extra squares.
Caution: Sarcasm and spoilers below.
You are correct and it was nice of you to solve a persons question and correct the “VENDOR REPRESENTATIVE’s” incorrect answer given.
It is very sad that too many can’t solve this. Even more so from the people selling this. It’s not even fractions!
Now I understand that just went over the vendors head. So for fun, I’ll do their job.
11’x17’=187 sq. ft.
11 sets would provide you with 11’x18’=198 sq. ft. of ragged edges. But put that to the side for a moment. Also realize 10 sets would only have given you 180 sq. ft. of raggedy crappy overpriced recycled Mt. Dew urine bottles that were shredded into fake grass and dog glued to some asbestos foam made in a led factory. (ok, I digressed… a lot)
You need to place 187 squares in an 11’x17’ pattern.
You cut the 1" “tabs” off of one 11’ side and one 17’ side.
Now your rectangle is only 10’11"x16’11".
Okler Product Page
Yet you have 11 squares to play with.
Use 4 tiles and cut tiles 2" in from the edge of the 1" tab which will give you 40" of edging per tile. You need 4 tiles for this and you will have a clean edge all around.
Why 2"? because 1" fits into the two sides of that raggedy rectangle + 1" to fill the gap.
Suggest you use Gorilla Glue. Yes that is a brand of glue. I didn’t make that up, and no it is not made from Gorillas…
Probably cat or squirrel maybe?
For the lot of us that are less adept with hands-on projects, anything that promises do-it-yourself ease is most likely an invitation for disaster. If you ever attempted your own oil change, hemmed your own jeans, or cut your own hair you probably know what I’m talking about. Fortunately, setting up some interlocking rubber flooring tiles is a nearly foolproof DIY project. Using the interlocking mechanism on rubber tiles is, quite literally, a snap.
There are two types of interlock flooring tiles: rubber puzzle mats and pin-mechanism interconnecting tiles. In this guide, we’ll walk through a couple of steps to effectively install puzzle mats.
Before you begin to assemble the puzzle mats, make sure that the floor area you are covering is free of excess dirt, dust, and debris. Also, eliminate any moisture, grease, or oil that may interfere with an efficient installation.
After clean-up, you’ll need the following materials:
Now, let’s get to installing interlocking rubber flooring tiles:
Interlocking rubber flooring tiles are an easy DIY flooring solution. With the exception of cutting the tile’s protrusions, putting together rubber puzzle mats is something that you probably learned as a kid when you put together a jigsaw puzzle! By setting up your own interlock flooring you save plenty of coin that would otherwise be spent on costly professional installers. With the money saved, you can now get a proper oil change, a new pair of jeans, and a symmetrical haircut!
For more Interlocking Pp Tilesinformation, please contact us. We will provide professional answers.