Tips for safely strapping loads on flatbed trucks

Each year, approximately 25,000 road accidents in the United States are closely related to road debris.

 

Each year, approximately 25,000 road accidents in the United States are closely related to road debris. Some of these accidents are fatal. In the United Kingdom, 22,000 accidents caused by objects falling from heavy equipment folding waterproof electric scooters for adults were reported in 2015. It is vital that measures are taken to protect loads on heavy equipment. In particular, keeping loads in place not only protects drivers and pedestrians from accidents, but also eliminates the associated costs.  

 

 

Management requirements.

1. To load and unload cargo, a person should be assigned to be responsible for loading and unloading trucks. Loading and unloading personnel should ensure that materials and goods are stacked smoothly, no rolling, no sliding, loading and unloading trucks are stacked from bottom to top and in layers; loading and unloading trucks are completed and tied firmly. 

2. Up and down unloading, layered unloading, keep the vehicle's center of gravity stable, no off-loading.

3. When using lifting equipment with the operation, strictly implement 6 "prohibitions": strictly prohibit the operator to stand on the running line of the lifting object or drilling under the lifting goods; prohibit standing on the side of the line angle and crane; prohibit standing on the lifting object; prohibit the manual calibration of the lifting object above 0.5 meters; prohibit the hands and feet directly attached to the lifted goods Picking and placing mats underneath; prohibition of not placing goods at will according to regulations.   

 

Specific requirements.

(1) Check whether the workers' labor protective equipment is neatly worn before the operation, and not to be unarmed, unarmed or wearing slippers, and not to engage in the operation without proper labor protection.

(2) Thorough and timely inspection of tools and spreaders should be carried out, and any faults and damages found should be replaced or scrapped in time to ensure operational safety. 

(3) human handling and handling should be measured, in collaboration with others, and shall not risk the risk of illegal operation; the vehicle shall not get off or get off when it is not smoothly parked and in position; when the vehicle needs to be transferred, the necessary protective measures shall be taken to ensure the safety of personnel and goods; after the vehicle is loaded and unloaded, the necessary protective measures shall be taken. Tie firmly.

(4) In the lifting operation, the operating procedures and relevant regulations must be strictly implemented. The operation, lifting, anchoring and hoisting work of the equipment, as well as the load operation and allowable load of the vehicle in the lifting operation, must be carried out by a person in charge. Strictly in accordance with the provisions of the equipment. 

(5) job site loading and unloading, handling, operators should be strict labor discipline, obey orders, no brutal loading and unloading, damage, destruction of goods, and shall not abandon the vehicle without authorization. Loading and unloading, playing, chasing and fighting at the operation site. 

(6) Strictly abide by the safety and fire regulations, do not smoke in the warehouse and workplace, and use all firearms.

(7) To observe the operation process in time to identify safety hazards. The operation must be stopped immediately and removed before continuing. 

(8) After each operation is completed, you should check and clean up the site without leaving any tools, hangers, packages and garbage, so that you can start and finish.

 

Contact us

Whenever you have demand for semi-trailer or have questions about semi-trailer, you are welcome to contact us at any time and look forward to your patronage. luyi vehicle will provide you with 24-hour online service.