How to paint your own home

In our family, the living room is an area of our most activities, the living room decoration is particularly important, because the living room decoration is an epitome of the family, the living room decoration is good, refracted the style and grade of the whole family decoration, reflected the master's aesthetic and grade.

 

Sincoheren Product Page

In our family, the living room is an area of our most activities, the living room decoration is particularly important, because the living room decoration is an epitome of the family, the living room decoration is good, refracted the style and grade of the whole family decoration, reflected the master's aesthetic and grade. After buying coating, we can brush coating by ourselves generally, how to brush coating by ourselves? Don't worry, today take you to see how you should brush paint brush.

 

First, how to brush paint is better, brush paint skills are what

1, dark paint as far as possible do not take water, otherwise easy to appear color difference; Paint the best one-time completion, otherwise it is easy to appear color difference.

2, do not paint in wet weather or winter, otherwise it will affect the overall construction quality, paint is not easy to dry.

3, pay attention to indoor ventilation and heat dissipation, paint, coating grinding to be completely dry.

4. When the brush is brushed and waiting to dry, soak in the water and watch whether there are bubbles in the brush place. If there are bubbles, break them immediately.

5. When the brush is dipped in the paint, the part of the bristles immersed in the paint should not exceed half of the hair length. If the root of the bristles is stained with paint, the paint brush will be deformed and the service life of the paint brush will be shortened.

6, with paint brush, before brushing the container must be gently wiped on the inner surface, in order to remove excess paint, so as not to drop paint on the ground.

7. When opening oil and crossing oil operation, the paintbrush should be vertical as far as possible and coated with the abdomen of the bristles. In the oil modification operation, the paintbrush will be flat, with the front end of the bristle brush lightly coated.

8, should pay attention to the direction of the paint brush, brush the vertical surface, the last brush should be carried out from top to bottom. When brushing horizontal surfaces, the last brushing should be done in the direction of light exposure. When brushing the wood surface, the last brush should be along the grain.

 

Two, how to brush the paint

1, brush coating, roller coating, spraying

Of paint besmear brush means nothing more than brush, roll, gush 3 kinds of methods. Among them, brush wall, wood generally with roller coating or spraying; Brush heating with spray or brush coating; Under normal circumstances: roller coating than brush coating cost oil, spraying than roller coating cost oil.

2, paint steps

Considering that most developers have now completed the water resistant putty tu brush this link, I take "water resistant putty metope brush latex paint" as an example, a brief introduction to the whole process of painting, generally divided into the following six steps:

(1) wall quality inspection. This step should be completed in closing room stage, everybody should check the metope that needs to brush paint inside the room above all whether solid, level off. If there are large cracks and holes in the wall, the developer or property should be advised to redo. Individual holes can be filled with gypsum.

(2) the preparation work before scraping putty. Ensure that the wall is solid and smooth, clean the wall with a steel brush or other tools, so that the wall as far as possible without soil, floating. Be in metope roll agent of concrete interface, as far as possible even, after waiting for its dry (be in commonly 2 hours above), can blow be bored with child.

(3) scraping water resistant putty. Before blowing putty, a measuring ruler above 2M should be used to measure the flatness of the wall to determine the method of blowing putty. General metope is blown 2 face be bored with child can, can make level already, can cover ground color again. The putty with poor flatness needs to be scraped several times locally. If the flatness is very poor, the wall tilt is serious, you can consider scraping a plaster for leveling, and then scraping putty. Every time I am bored with the interval of scraping should be more than 2 hours (table dry).

(4) Polish putty. Water resistant putty after 1-2 days to start grinding putty. Burnish optional is at night, with the electric bulb of 100 watts above press close to metope illumination, edge burnish edge sees level off degree.

(5) brush primer. After cleaning the floating dust on the surface of the putty after polishing, you can brush primer. Primer besmear brush again can, be sure to be uniform, to be dry (2-4 hours) can proceed to the next step.

(6) brush finish paint. Finish paint usually brush two times, between each time should be separated by more than 2-4 hours (depending on the table dry time) to its basic dry. After the second time finish paint brush, need 1-2 days to completely dry, in the paint completely dry before attention should be paid to waterproof, drought prevention, sunscreen, prevent paint film problems.

 

Please visit our website for more information on this topic.

Want more information on Portable Diode Laser Hair Removal? Feel free to contact us.