Three key factors to look for in a mini excavator.

The mini excavator can be used for multiple purposes by replacing the auxiliary equipment. While we are using it, if we pay attention to some details, then it will make the use of a little longer, the next briefly.

The mini excavator can be used for multiple purposes by replacing the auxiliary equipment. While we are using it, if we pay attention to some details, then it will make the use of a little longer, the next briefly.

1. Avoid impurities

For work in harsh environments, complex conditions in the place of mini excavator, first of all to use high-quality, matching parts and lubricants, grease, blocking the source of harmful impurities; second to do a good job at the work site of the mini excavator protection, to ensure that the corresponding institutions can work properly, to prevent a variety of impurities into the internal mini excavator. Failure of the mini excavator, as far as possible to the regular repair place for repair. On-site repair, but also to do a good job of protective measures to prevent on-site repair of replacement parts in the micro-excavator before entering the dust and other impurities contamination.

Translated with DeepL.com (free version)

2. Applicable temperature

Mini excavator in the use of the process, one should prevent overloaded operation at low temperatures, to ensure the normal operation of the low-speed pre-temperature stage, so that the mini excavator to reach the specified temperature before driving or working, do not ignore its important role because of no problems at that time; two to prevent the mini excavator running at high temperatures, the mini excavator should be frequently checked in the course of operation of the value of a variety of temperature tables, and found that the problem is immediately Stop the machine for inspection, and find faults in time to eliminate.

3. Reasonable working loads

The magnitude and nature of the working load of a mini excavator has a significant effect on the wear process of a mini excavator. Generally speaking, the wear of parts increases proportionally with the increase in load. When the load on the part is higher than the average design load, its wear will increase. Also, all other things being equal, a steady load will result in less wear, fewer failures, and a lower life expectancy than under a dynamic load. Ensuring a normal working load depends largely on the use of the mini excavator by the operator.