All type of Industrial Rubber Belts
We are a leading manufacturer and exporters of Industrial belts that widely used in almost all industries. Our range includes Special Belts, PU Timing coated Belts, PVC Conveyor Belts and many more. Customers can avail these belts as per their requirements and needs in regards to sizes, length and width.
The range includes the following products:
This guide is to help educate on the different types of conveyor belts. These seven conveyor belts are the most common in conveyor belt applications.
The roller bed conveyor belts utilize gravity to hold the items on the belt. This type of conveyor belt is flat and made up of rollers selected to match the specifications of the load above. Shorter roller belts can be made up of two rollers, but more rollers will need to be added as the distance of the belt lengths. Therefore, a longer belt will be required as well.
Roller Bed Conveyors can be utilized for moving, packing, sorting, assembling, and inspecting items. Many of us have witnessed roller bed conveyors used at the airport baggage claim or in those intense Internet videos with people loading numerous articles quickly into boxes.
Flat Belt conveyors are used mainly in manufacturing environments and slow assembly lines. With the correct belt, Flat Belts can also move small, soft, or irregular-shaped items. They are utilized to transport items within an operation. This belt uses a series of pulleys to drive a continuous flat belt. Objects are positioned on the belt and carried from one spot to the end of the belt. These belts can be made of a natural material of a synthetic fabric like polyester or nylon.
Modular Belt Conveyors are made up of interlocking sections of hardened material, usually hard plastic, in a single loop. The sections of material can be replaced individually. Only replacing one area helps save cost, not the entire belt. In addition, hardened plastics are better suited to handle rough, sharp, or abrasive materials.
Modular Belts have a higher cost. However, they also can do a majority of conveying functions. Modular belts can go around corners, travel straight, and go up and down inclines. All of those motions can use the same motor.
The plastic in the modular belts makes them a good fit for food products since they are easier to clean and have spaces where fluid can be drained or retained on the conveyor. The plastic makeup of the belt aids with detecting unwanted metals as well.
Cleated belt conveyors are utilized to move products up an incline. These conveyors feature raised cleats on the belts to help hold the products or items in position as they travel up or down the conveyor. Another advantage of the cleats is that they create consistent spacing between the items on the conveyor belt. There are numerous shapes and sizes of cleats. Another type of cleated belt is the elevator belt that utilizes scoops or buckets to carry materials or products up a steep incline or a vertical surface.
Similar to Flat Belts, except Incline Belts have a rough surface. This surface creates more friction and helps items hold their position as they travel up the belt. These belts do not produce the same spacing that a cleated belt does.
These conveyor belts are made of rated materials and are ready to be sanitized often. These belts are usually associated with food-grade applications. Sanitary conveyors are generally flat wire belts. These are tough belts that stand up to wear and tear and are easy to clean.
IBT Inc. has two in-house conveyor belting groups. This includes heavyweight conveyor belts and lightweight conveyor belts and their different applications.
These belts have fabric construction and can range from a single-ply fabric to multiple-plys of fabric. Each individual ply has a different tension rating. The rubber covers adhere to both the top and bottom to protect the fabric-plys.
Typical top covers or carry covers range from 3/16&#; to &#;&#; depending on the design and strength of the conveyor belt. The bottom cover or pulley cover varies from 1/16&#; to 1/8&#; depending on the design and strength of the belt.
Fenner Dunlop offers their Patriot X line of rock belts. These belts are available in 24, 30, 36, and 42-inches. The proprietary cover compound offers significantly better rip, tear, and impact performance compared to typical plied belting. The new finger splice design is optimized for both performance and fabrication efficiency. The Patriot X line has a safety factor greater than 8:1.
Fenner Dunlop also offers the Nova X line. This belt has a patented dual crimp weave for higher strength and low stretch applications. The Nova X line uses a unique fabric weave that allows for improved mechanical fastener retention and splice life. This line conveys bulk material more reliably with the advanced flexible belt core and makes it resistant to rips, tears, impacts, and punctures.
Applications:
Crushed Stone
Ready Mix
Cement
Sand
Gravel
Fertilizer Plants
MOR stands for moderately oil resistant. These use the same fabric design as the rock belts, but the rubber used on the top and bottom covers are designed to resist oil penetrating them and causing the rubber to swell.
Some MOR belts do not use a bottom cover. This is referred to as a bareback or BB.
Fenner Dunlop&#;s WoodMaster is a member of the Plylok line. WoodMaster is plied belting with less than 2% stretch and superb abrasion resistance for general purpose applications. The increased gauge rubber between splices helps the WoodMaster to absorb more energy and gives more impact resistance.
Applications:
Paper Mills
With competitive price and timely delivery, haichuan sincerely hope to be your supplier and partner.
Saw Mills
Wood Board Plants
Wood Chips
Bark
Broken Belts
Chipper End Feed
Planer Belt
Pulp Belts
Sander Belts
Food handling belts are plied rubber with a rubber cover. They can be interwoven with PVC or RMPVC covers. Food handling belts are smooth for horizontal conveyance and textured/cleated for incline/decline applications. They have a plied monofilament or spun polyester carcass with a urethane or PVC cover.
Applications:
FDA approved
Handle direct food contact or packaged products
Found in bakeries, pet food production, and more.
Package handling belts are plied rubber. They can come with or without a cover. Package handling belts are smooth for horizontal conveyance and textured/cleated for incline/decline applications, utilized by manufacturers, packaging, distribution centers, etc.
Applications:
Manufacturers
Packaging
Distribution Centers
Power Transmission belts are flat belts that transfer horsepower from one point to another. They have a nylon core with rubber covers. Power Transmission belts have a plied fabric/rubber construction and are usually a monofilament with a urethane cover.
Applications:
Printing
Labeling
Paper Industry
Driving Live Rollers
As your experts for conveyor belting, we want to help you find the best belt for your application- but that&#;s not all. IBT&#;s IRPG team partners with various industries, offering a wide selection of heavyweight and lightweight conveyor belting and custom fabrication services. Contact your local IBT rep to learn more about your conveyor belt options.
For more information, please visit Haichuan Rubber Belt.