Hastings Catalog

269.945. web www.hfgp.com THE TOOLS YOU TRUST HO T L I N E T OO L S & E Q U I PME N T

: 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 05/23 SAFETY / STANDARDS Safety: Isolating a worker from hazardous voltage is a serious business and one in which Hastings prides itself in being a leader. From the raw material we purchase to the processes and equipment used to shape the material, to the procedures and standards used to make and test the final product, Quality is the first requirement. Our fiberglass is the finest quality in the industry, made in the USA, will withstand 100KV per foot, will not absorb moisture, and is very durable. Standards: We manufacture our product to meet a variety of industry standards including ASTM, IEC and OSHA. While OSHA is the only required standard, we test to the specifications of all these standards. Quality: We pride ourselves with the quality of our service and our products. Our fiberglass is just one product line that exemplifies this level of commitment to quality. In the case of hot line tools, an issue with quality could relate directly to a safety issue and therefore cannot be tolerated. Material: All the glass used in our product is electrical grade. Our resins are selected for the best properties of UV resistance, moisture resistance, strength, dielectric properties, and light weight. Our incoming raw material is tested, additional test occur during production, and the completed fiberglass pole is tested. Testing doesn&#;t make the product better, it verifies that the product is consistent from run to run and will perform as expected in the field. Experience: Hastings works closely with the utility industry in solving application problems and providing training in the proper use of our equipment. Through our close contact with our customers, we stay in touch with their needs and this guides our efforts at future product designs. Hastings also participates with the development of industry standards. 2 Ratings: 100 percent of the fiberglass pole we produce is tested to meet the 100kV per foot testing standards. CAUTION: THE PRODUCTS WE SUPPLY ARE INTENDED TO BE USED AND SERVICED ONLY BY PROFESSIONAL PERSONNEL WHO HAVE BEEN TRAINED IN PROPER WORK AND SAFETY PRACTICES RELATING TO THE USE OF THIS TYPE OF PRODUCT. THE INFORMATION PROVIDED ON THE PRODUCTS DOES NOT COVER EVERY POSSIBLE CONTINGENCY TO BE ENCOUNTERED AND IT IS NOT INTENDED TO BE USED AS A SUBSTITUTE FOR ADEQUATE TRAINING AND EXPERIENCE. IF SPECIFIC SITUATIONS OR QUESTIONS ARISE REGARDING THE USE OF THE PRODUCTS OR, IF ADDITIONAL INFORMATION IS REQUIRED, OR WRITE THE FACTORY BEFORE PROCEEDING.

: 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 05/23 3 TERMS AND CONDITIONS OF SALE TERMS AND CONDITIONS OF SALE All sales by Hastings Fiber Glass Products, Inc. are subject to the following terms and conditions, as well as the other terms contained in our full Terms and Conditions of Sale, which are available upon request. We object to and will not agree to any terms that are additional to or different from these terms. Quotations; Prices; Orders. Written quotations automatically expire 30 calendar days from the date of issue unless sooner terminated by notice. Prices are based on standard catalogue items, packaged, marked and tested in line with our stated company policy. Prices are subject to change without notice. Price at which the products will be billed will be that which is published or in general effect when shipment is made. Prices do not include Federal, State or Municipal Taxes. All orders are subject to our approval and acceptance. All orders are subject to a minimum order charge of $50.00 for all products except parts, which are subject to a minimum order charge of $25.00. Delivery. Delivery shall be F.O.B. our factory in Hastings, Michigan. Shipping charges are prepaid and will be added to Buyer&#;s invoice. Shipping dates are estimates only. If we are unable to finish and ship the products to Buyer on time because of anything we cannot control, then the estimated delivery time will be extended and we will not be liable to Buyer for the delay. Stenographic, clerical and billing errors are subject to corrections. Authorized returns are subject to a minimum 20% restocking charge. Defects; Remedies. We will repair or replace, at our option, any product we manufactured that has not been subject to misuse, abuse or improper application and which proves to be defective in materials or workmanship such that the value of the product to Buyer is materially impaired within one year from date of shipment. If Buyer approved drawings of, specifications for, or a sample of the product, then the product shall not be defective to the extent that it conforms thereto. Buyer shall be responsible for packing, shipping and transportation costs for returning products to us. No products shall be returned to us without our prior written consent. The acceptance of any product returned to us shall not be deemed an admission that the products are defective or in breach of any warranty, and if we determine that the products are not defective, they may be returned to Buyer at Buyer&#;s expense. If we fail to repair or replace any defective product within a reasonable time, then we will be liable to Buyer for the lesser of (i) the reasonable cost of repair or replacement by a third party or (ii) that part of the purchase price of the defective product that has been paid by Buyer, but Buyer shall not obtain repair or replacement by a third party without giving us at least 15 days prior written notice. This paragraph sets forth Buyer&#;s sole and exclusive remedies for any defect in the products. No warranty is made with respect to any item (including, but not limited to, equipment, accessories, component parts or auxiliary equipment) we did not manufacture. We shall in no event be responsible or liable for modifications, alterations, misapplication or repairs made to our products by Buyer or any third party, or for damage caused by negligence, accident, overloading or improper use of the products by Buyer or any third party. Only our authorized officer may modify, expand or extend this warranty, waive and of its limitations or exclusions, or make any different or additional warranties with respect to the products, and then only in a signed writing. On any resale of the products, Buyer shall contractually limit its buyer&#;s rights and remedies against both Buyer and us to the same extent as Buyer&#;s rights and remedies are limited under this Agreement. Products are sold with the express understanding that their life and fitness for purpose are indeterminate and largely depend on application and operating circumstances and continuing maintenance. Limitations. EXCEPT AS STATED ABOVE, WE MAKE NO WARRANTIES AS TO THE PRODUCTS AND, IN PARTICULAR, MAKE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND BUYER IS SOLELY RESPONSIBLE FOR DETERMINING THE PROPER APPLICATION AND USE OF THE PRODUCTS. WE WILL NOT HAVE ANY TORT LIABILITY TO BUYER WITH RESPECT TO ANY OF THE PRODUCTS AND WILL NOT BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, EXEMPLARY, INDIRECT OR PUNITIVE DAMAGES ARISING FROM ANY PRODUCT DEFECT, DELAY, NONDELIVERY, RECALL OR OTHER BREACH. Buyer must bring any claim, suit or other proceeding arising out of this Agreement or relating to the products within one year from the date of the breach. Design Changes. We reserve the right to incorporate new design or improvements on the products or their component parts without obligation in regards to a customer&#;s existing stock. Buyer Obligations. Buyer shall indemnify us and hold us harmless, and if we so request defend us, with respect to all costs, damages, losses, claims, judgments, and expenses, including attorney fees, that we incurs as a result of or in connection with (a) any act, omission or use of the products by Buyer, its employees, or its customers; (b) any breach by Buyer of any of its obligations under this agreement; (c) any claimed unfair competition, or any claimed patent, trademark, or copyright infringement, or any claimed infringement of any other proprietary right; or (d) any other claim resulting from our manufacture of the products to Buyer&#;s specifications. Miscellaneous. Any sale of products to Buyer shall be considered to have been made in, and shall be governed by and interpreted according to the laws of, the State of Michigan, and any action relating to the same may be brought in any federal or state court located in Barry or Kent County, Michigan. Any agreement to purchase goods shall be binding upon us and upon Buyer, and upon our respective legal representatives, successors and assigns. Caution: The products we supply are intended to be used and serviced only by professional personnel who have been trained in proper work and safety practices relating to the use of this type of product. The information provided on the products does not cover every possible contingency to be encountered and it is not intended to be used as a substitute for adequate training and experience. If specific situations or questions arise regarding the use of the products or, if additional information is required, or write the factory before proceeding.

: 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 05/23 4 ISO CERTIFICATION

01 &#; Hot Sticks & Cutters n Telescopic Sticks n Disconnect Sticks n Tree Trimmers n Measuring Sticks n Body Rescue Hook Sticks n Ratchet Cutters n Cable Slicers n Lamp Changer Poles n Pike Poles n Wire Cutters n Bolt Cutters n Telescopic Handle Cutters n Straight Sticks n Shotgun Sticks n Guy Strand Cutters n Hot Sticks for Battery Tools n Camera Mounted Sticks 02 &#; Hot Stick Accessories n Various Universal Tools n Conductor Cleaning Brushes n Tagging Tools n Hold Card Clamp n Fuse Pullers n Fuse Claw/Fuse Cup n Spray Can Holder n Hot Stirrups 03 &#; Conductor & Personnel Support n Wire Tongs n Temporary Cross Arms n Saddles n Temporary Dead End Arms n Link Sticks n Conductor Support Arms n Ladders n Insulated Platforms n Extension Arms 04 &#; Grounding & Jumpering Equipment n Ground/Jumper Clamps n Ground Mats n Underground n Grounding/Jumper Cables n Jumper Holders n Elbow Pullers n Ferrules n Load Pick-up Tools n Duct Rodders n URD Grounding n Truck Grounding Reel 05 &#; Instruments n Hot Stick Tester n Ammeter n Ground or Jumper Assembly Tester n Wireless Phasing Meter n Voltage Detector n Regulator Neutral Detector n DC Hipot Adapter n Transformer & Capacitor Tester n Fault Indicator n Hot Line Indicator n Digital Voltage Phasing Meters 06 &#; Cover Up n Cross Arm Guards n Pole Guards n Rubber Blankets n Line Guards n Insulator Hoods 07 &#; Truck Accessories n Lights & Holders n Tool Bags n Safety Lanyards n Tool Boards n Flag Kits n Lift Arms n Canister Kits n Barricades n Jib Adapters n Tool Trays n Hot Stick Trailer 08 &#; Rigging & Lifting Equipment n Hoists n Blocks n Slings n Grips n Gins n Ropes 09 &#; Care & Maintenance n Cleaning Products n Repair Parts n Parts Break Down Pages | 269.945. | www.hfgp.com Trusted by crews around the world. Click on any product/category to view full specifications and details. 195 9 &#; 2 02 3

01 Hot Sticks & Cutters

STANDARD -O-POLE® HOT STICK This style stick can be locked at each length listed. The tip diameter for this model is 7/8&#;. Tip section will not interlock. -O-POLE® HOT STICK WITH TIP LOCK FEATURE Tip retracts and locks into next larger section. The tip diameter for this model (extended) is 7/8&#; or (retracted) is 1 3/32&#;. CAT NO EXTENDED RETRACTED BASE DIA LBS CASE ST-225 17&#;-21&#;-25.5&#; 60&#; 2 3/16&#; 7.0 C-30 ST-230 17&#;-21.5&#;-26&#;-30&#; 61 5/8&#; 2 3/8&#; 8.8 C-30 ST-235 17&#;-21.5&#;-26&#;-30&#;-35&#; 63 3/8&#; 2 11/16&#; 11.0 C-35 ST-240 22&#;-26&#;-30&#;-35&#;-40&#; 65 3/8&#; 2 7/8&#; 13.9 C-40 ST-245 22&#; -26&#; -30&#; -35&#; -40&#; -44.5&#; 67&#; 3 3/16&#; 16.5 C-45 HEAVY DUTY -O-POLE® HOT STICK The tip diameter for this model is 1 3/32&#;. All sections will interlock. CAT NO EXTENDED RETRACTED BASE DIA LBS CASE SH-216 9&#;-13&#;-17&#; 58 1/8&#; 1 7/8&#; 4.8 C-30 SH-200 13&#;-17.5&#;-21.5&#; 60&#; 2 3/16&#; 6.5 C-30 SH-250 13&#;-17.5&#;-21.5&#;-26&#; 61 5/8&#; 2 3/8&#; 8.3 C-30 SH-230 13&#;-17.5&#;-21.5&#;-26&#;-30&#; 63 3/8&#; 2 11/16&#; 10.3 C-35 SH-235 17&#;-21.5&#;-26&#;-30&#;-35&#; 65 3/8&#; 2 7/8&#; 13.0 C-35 SH-240 17&#; -21.5&#; -26&#; -30&#; -35&#; -40&#; 67&#; 3 3/16&#; 15.9 C-45 CAT NO LENGTH LBS 839-2 56&#; 2.0 EXTENSION SECTION The extension section mounts on universal end to get additional length. HOT STICKS AND CUTTERS TELESCOPING HOT STICKS The original -O-Pole® Hot Stick is designed for long reach, speed, convenience and safety. All sections are fabricated with reinforced electrical grade fiberglass, for greater strength and high dielectric properties. FEATURES AND BENEFITS: &#; For opening and closing disconnect switches &#; Replacing fuses on transformers &#; Pruning tree limbs &#; Fluorescent green tip section is highly visible and has a foam core &#; Several models and lengths available CAT NO EXTENDED RETRACTED BASE DIA LBS CASE S-212 12&#; 44&#; 1 5/8&#; 3.8 C-212 S-216 12&#;4&#; - 16&#; 56&#; 1 5/8&#; 4.5 C-30 S-220 17&#; - 20&#; 58&#; 1 7/8&#; 5.5 C-30 S-225 17&#; -21&#;- 25.5&#; 60&#; 2 3/16&#; 7.0 C-30 S-230 17&#; -21.5&#; -26&#; -30&#; 61 5/8&#; 2 3/8&#; 8.8 C-30 S-235 17&#; -21.5&#; -26&#; -30&#; - 35&#; 63 3/8&#; 2 11/16&#; 11.0 C-35 S-240 22&#; -26&#; -30&#; -35&#; -40&#; 65 3/8&#; 2 7/8&#; 13.9 C-40 S-245 22&#; -26&#; -30&#; -35&#; -40&#; -44.5&#; 67&#; 3 3/16&#; 16.5 C-45 : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 12/19 100 ST-235 839-2 -O-POLE SLIDE STOP See Page 101 for details

-O-POLE® II The &#;No Twist&#; stick has a unique triangular design. All models are heavy duty. FEATURES AND BENEFITS: &#; Triangle shape enables each section to &#;lock in automatically&#;, no need to search for the button &#; Fluorescent green tip section is highly visible and has a foam core &#; Sections can be removed or added to make the stick the preferred length. Example: HV-235 remove 4 sections to make it 20 ft instead of 35 ft &#; Ergonomic design gives the operator a better gripping surface for better control &#; All sections have a smooth glossy surface for routine cleaning and waxing CAT NO EXTENDED RETRACTED BASE DIA LBS CASE HV-212 12&#; 7&#; 58&#; 1.45&#; 3.7 C-30 HV-216 16&#; 9&#; 60&#; 1.61&#; 5.0 C-30 HV-220 21&#; 62&#; 1.75&#; 6.4 C-30 HV-225 25&#; 6&#; 64&#; 1.91&#; 8.1 C-40 HV-230 30&#; 66&#; 2.07&#; 10.0 C-40 HV-235 35&#; 68&#; 2.22&#; 12.1 C-40 HV-240 39&#; 6&#; 69&#; 2.38&#; 14.4 C-40 HV-245 44&#;5&#; 72&#; 2.54&#; 18.125 C-45 -O-POLE® BUCKET STICKS AND CANISTERS Ideal for quick access for linemen working out of a bucket truck. FEATURES AND BENEFITS: &#; Stick collapses below lip of bucket &#; Bucket sticks are available in 8&#; and 12&#; &#; Light weight bucket storage canister available for both models &#; Snap on lid secured with lanyard CAT NO EXTENDED RETRACTED BASE DIA LBS CASE HV-208 8&#; 26&#; 1.75&#; 3.0 C-208 HV-312 12&#; 37&#; 1.61&#; 4.3 C-312 06-185 FITS HV-208 3.8 06-186 FITS HV-312 5.1 Locking Button Top View End View showing Triangular Shape HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 12/19 101 PATENT NO. US 8,469,423 PATENT NO. US 8,469,423 HV-235 06-186 HV-312 HV-208 06-185 CAT NO DESCRIPTION LBS P SLIDE STOP - FITS S-225 / ST-225 0.05 P SLIDE STOP - FITS S-230 / S-235 / S-240 FITS ST-230 / ST-235 / ST-240 FITS SH-250 / SH-230 / SH-235 0.05 P SLIDE STOP - FITS HV-225 / HV-230 0.05 P SLIDE STOP - FITS HV-235 / HV-240 / HV-245 0.05 -O-POLE SLIDE STOP &#; Stops Hot Stick Sections from extending while in storage &#; Outer Band provides surface protection and grip to help prevent rolling and sliding when in storage

-O-POLE® MEASURING STICKS Safely measure vertical heights. Available in English or Metric graduations. Used to measure overhead lines, , cable-TV, highway clearances, and structures. FEATURE AND BENEFITS: &#; Eye-level reading, no calculations required, the read-height is shown at the top of the base section &#; Positive locking buttons, spring-loaded, fast accurate and easy to extend &#; Standardized parts for quick and easy repair and replacement CAT NO EXTENDED RETRACTED WEIGHT CASE E-25 25&#; 65 3/4&#; 3.2 lbs. C-35 E-30 30&#; 65 3/4&#; 4.5 lbs. C-35 E-35 35&#; 65 3/4&#; 5.9 lbs. C-35 E-40 40&#; 65 3/4&#; 7.5 lbs. C-35 E-50 50&#; 69 3/16&#; 13.2 lbs. C-40 M-25 7.5 METERS 1.67 METERS 1.5 kg. C-35 M-35 10.5 METERS 1.67 METERS 2.7 kg. C-35 M-40 12 METERS 1.67 METERS 3.4 kg. C-35 M-50 15 METERS 1.76 METERS 6.0 kg. C-40 COMBINATION -O-POLE® HOT STICK AND MEASURING STICK One stick does it all, the heavy duty -O-Pole II and Measuring Stick, all in one. Available in English or Metric graduations. FEATURES AND BENEFITS: &#; Open and close switches, disconnects, line fuses, cut outs, as well as measure elevated heights &#; Eye-level reading, no calculations required, the read-height is shown at the top of the next collapsed section &#; Markings are printed in large easy to read numbers &#; English models are in feet and inches &#; Metric models are in meters and centimeters CAT NO EXTENDED RETRACTED BASE DIA WEIGHT CASE EV-25 25&#; 6&#; 64&#; 1.91&#; 8.1 lbs. C-40 EV-30 30&#; 66&#; 2.07&#; 10.0 lbs. C-40 EV-35 35&#; 68&#; 2.22&#; 12.1 lbs. C-40 EV-40 39&#; 6&#; 69&#; 2.38&#; 14.4 lbs. C-40 MV-25 7.8 METERS 1.63 METERS 4.85 cm 3.7 kg. C-40 MV-30 9.2 METERS 1.68 METERS 5.25 cm 4.5 kg. C-40 MV-35 10.6 METERS 1.72 METERS 5.6 cm 5.5 kg. C-40 MV-40 12 METERS 1.75 METERS 6.04 cm 6.5 kg. C-40 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 10/22 102 PATENT NO. US 8,469,423 E-25 EV-30 QUICK CHANGE HEAD &#; Available on all HV - MV - EV Models &#; The quick change makes it easy to change attachments &#; Just a quarter turn on the thumb screw, push the button and the attachment comes free &#; To order add -Q behind the part number

-O-POLE® TRUCKERS LOAD HEIGHT STICK Ideal for measuring truck loads. FEATURES AND BENEFITS: &#; 15&#; Length fully extended &#; 4&#; Arm folds down for storage CAT NO EXTENDED RETRACTED LBS CASE E-15-1 15&#; 67 1/2&#; 3.0 C-40 -O-POLE® RE TRE VER POLE Light weight non-conductive telescopic tool for quick and easy installation of wire and cables. FEATURES AND BENEFITS: &#; Combination hook and eye tip for pulling and pushing &#; Ideal for installation of telecommunications, electrical systems, sound systems, and computer systems &#; Easy to use, user can push or pull wires and cables over dropped ceilings, rafters, and suspended ceilings which are difficult to access CAT NO EXTENDED RETRACTED LBS CASE R-30 30&#; 63 1/2&#; 3.5 C-35 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 05/23 103 E-15-1 R-30 COMPACT TELESCOPIC HOT STICKS &#; Available in 20&#; and 30&#; models &#; 9 section sticks &#; Fits behind the seat of a truck or in the trunk of a car &#; Great for anyone that has limited space &#; Triangle shape enables each section to lock automatically &#; Fluorescent green tip section is highly visible and has foam core &#; Sections can be removed or added to make stick the preferred length &#; Ergonomic design gives the operator a better gripping surface for better control CAT NO DESCRIPTION RETRACTED LBS HV-320 20&#; TELESCOPIC COMPACT STICK 43&#; 9.1 HV-330 30&#; TELESCOPIC COMPACT STICK 57&#; 12.0 HV-320 HV-330

LAMP CHANGER -O-POLE® The lamp changer pole is telescopic, light weight, reinforced, and made of non conductive fiberglass construction. Snap out the length you need. Adaptable to McGill type changers and broken socket removers. CAT NO EXTENDED RETRACTED LBS CASE L-20 21&#; 7&#; 58 3/4&#; 3.0 C-30 L-35 36&#; 1&#; 64&#; 7.0 C-35 CAT NO LAMP SIZE LBS 154-C 400W T-16 MERCURY LAMP 0.5 161-C 175W MERCURY LAMP 0.5 200 BROKEN LAMP BASE REMOVER 0.2 P ADAPTER TO MODIFY THE LAMP CHANGER ACCESSORIES TO FIT THE UNIVERSAL POLES 0.2 CAT NO LAMP SIZE LBS 154-AC 400W T-16 MERCURY LAMP 0.7 161-AC 175W MERCURY LAMP 0.7 200-A BROKEN LAMP BASE REMOVER 0.5 A G.C.A. LAMP CHANGER ADAPTER FOR USE ON ALL STICKS WITH UNIVERSAL TYPE HEAD 0.5 FOR USE WITH LAMP CHANGER POLES FOR USE WITH ALL UNIVERSAL STICKS HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 06/24 104 Spring is for use with 152, 153, 156, 158 Lamp Changers P 161-C A 154-AC 200 L-35

SWITCH HEAD STICK &#; Switch heads are made of bronze &#; Designed to NEMA standards 1 1/4&#; DIAMETER 1 1/2&#; DIAMETER FT CAT NO LBS CAT NO LBS 4 460-4 1.5 ----- ----- 6 460-6 2.3 462-6 2.8 8 460-8 3.0 462-8 3.6 10 460-10 3.2 462-10 4.8 12 460-12 3.5 462-12 6.5 14 ----- ----- 462-14 7.3 16 ----- ----- 462-16 8.2 18 ----- ----- 462-18 9.1 20 ----- ----- 462-20 10.0 DISCONNECT HEAD STICK &#; Heavy duty &#; For large switches and disconnects 1 1/4&#; DIAMETER 1 1/2&#; DIAMETER FT CAT NO LBS CAT NO LBS 4 461-4 1.6 ----- ----- 6 461-6 2.4 541-6 3.1 8 461-8 3.6 541-8 3.7 10 461-10 4.8 541-10 4.9 12 461-12 6.5 541-12 6.6 14 ----- ----- 541-14 7.4 16 ----- ----- 541-16 8.3 18 ----- ----- 541-18 9.2 20 ----- ----- 541-20 10.1 INSULATED HEAD STICK &#; For confined spaces and tight switch gear &#; Prong is made of solid fiberglass material 1 1/4&#; DIAMETER 1 1/2&#; DIAMETER FT CAT NO LBS CAT NO LBS 4 501-4 1.2 ----- ----- 6 501-6 2.1 502-6 2.3 8 501-8 2.6 502-8 3.1 10 501-10 3.5 502-10 4.3 12 501-12 4.3 502-12 5.2 14 ----- ----- 502-14 6.2 16 ----- ----- 502-16 7.1 18 ----- ----- 502-18 8.1 UNIVERSAL HEAD STICK &#; Can adapt with any universal tool found in the Hotstick Accessories Section 1 1/4&#; DIAMETER 1 1/2&#; DIAMETER FT CAT NO LBS CAT NO LBS 4 567-4 1.4 ----- ----- 6 567-6 1.7 ----- ----- 8 567-8 2.6 ----- ----- 10 567-10 3.3 469-10 4.5 12 567-12 4.0 469-12 6.5 14 ----- ----- 469-14 7.3 16 ----- ----- 469-16 8.3 18 ----- ----- 469-18 9.2 20 ----- ----- 469-20 10.1 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 11/22 105 567-4 461-4 460-4 461-4 501-4

SUBSTATION ADJUSTABLE LENGTH DISCONNECT -O-POLE® STICKS Designed for use in close confines of substations FEATURES AND BENEFITS: &#; Round Stick with HASTINGS Square Button design prevents button shearing under heavy load &#; Eliminates problem of threading long sticks through substation structure &#; Eliminates multiple length stick requirements, sticks are adjustable to length in one foot increments &#; Top section is conventional 1 1/4&#; diameter Hot Stick. Can be removed for use as single one piece Hot Stick. Base section is 1 1/2&#; diameter. &#; Extended length is shown at each lock position for reference &#; Safe guard design, top section must extend beyond base before lock will engage, giving full protection of fire retardant unicellular core (See information on collapsed and minimum usable length) &#; Available with standard disconnect head, switch head, or universal head DISCONNECT HEAD SWITCH HEAD UNIVERSAL HEAD CAT NO CAT NO CAT NO EXTENDED LENGTH MINIMUM USABLE LENGTH COLLAPSED LENGTH LBS 14&#; 10&#; 8&#; 4&#; 5.5 18&#; 12&#; 10&#; 4&#; 7.5 20&#; 14&#; 12&#; 4&#; 9.5 H-10 9&#; 6&#; 5&#; 4&#; 5&#; 4.2 CARRYING CASES &#; Made from durable water resistant nylon reinforced vinyl &#; All cases include a snap type flap and carrying handles CARRYING CASES FOR 1 1/4&#; AND 1 1/2&#; DIAMETER STICKS LENGTH OF STICK SINGLE POCKET TWO POCKET THREE POCKET FOUR POCKET 2&#; ---------- ---------- C-432 C-442 4&#; C-414 C-424 C-434 C-444 6&#; C-416 C-426 C-436 C-446 8&#; C-418 C-428 ---------- ---------- 10&#; C- ---------- ---------- ---------- 12&#; C- ---------- ---------- ---------- HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 106 C-424

SPLICED SWITCH AND DISCONNECT STICKS &#; Eliminates storage problems and duplication of tools &#; Choose top section and base section and add extension sections as needed for extra length &#; Switch and disconnect heads are made from bronze alloy &#; Insulated head is fiberglass SNAP ON ADAPTERS CAT NO DESCRIPTION A MALE UNIVERSALADAPTER FOR 1 1/4&#; STICK A MALE UNIVERSALADAPTER FOR 1 1/2&#; STICK MALE DISCONNECT HEAD ADAPTER FOR 1 1/4&#; STICK MALE DISCONNECT HEAD ADAPTER FOR 1 1/2&#; STICK A FEMALE UNIVERSALADAPTER FOR 1 1/4&#; STICK A FEMALE UNIVERSALADAPTER FOR 1 1/2&#; STICK A FEMALE BASE CAP FOR 1 1/4&#; STICK A FEMALE BASE CAP FOR 1 1/2&#; STICK SWITCH HEAD INSULATED HEAD DISCONNECT HEAD 1 1/4&#; DIA 1 1/2&#; DIA 1 1/4&#; DIA 1 1/2&#; DIA 1 1/4&#; DIA 1 1/2&#; DIA FT CAT NO LBS CAT NO LBS CAT NO LBS CAT NO LBS CAT NO LBS CAT NO LBS 2 -2 1.0 ----- ----- -2 0.8 ----- ----- -2 1.1 ----- ----- 4 -4 1.6 -4 2.3 -4 1.4 -4 2.2 -4 1.8 -4 2.3 6 -6 2.0 -6 3.4 -6 1.8 -6 3.0 -6 2.1 -6 3.4 8 -8 2.6 -8 4.5 -8 2.2 -8 4.2 -8 2.8 -8 4.5 10 ----- ----- -10 6.0 ----- ----- -10 5.8 ----- ----- -10 6.0 UNIVERSAL HEAD BASE SECTIONS EXTENSION SECTIONS 1 1/4&#; DIA 1 1/2&#; DIA 1 1/4&#; DIA 1 1/2&#; DIA 1 1/4&#; DIA 1 1/2&#; DIA FT CAT NO LBS CAT NO LBS CAT NO LBS CAT NO LBS CAT NO LBS CAT NO LBS 2 -2 1.3 ----- ----- ----- ----- ----- ----- 546-2 1.0 ----- ----- 4 -4 2.0 -4 2.3 552-4 1.5 -4 1.8 546-4 1.2 -4 2.0 6 -6 2.3 -6 3.4 552-6 2.0 -6 2.7 546-6 2.0 -6 3.0 8 -8 3.1 -8 4.5 552-8 2.7 -8 3.6 546-8 2.5 -8 4.1 10 ----- ----- -10 6.0 552-10 3.5 -10 4.5 ----- ----- -10 5.3 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 107 -2 -2 -2 -2 546-2 552-4 A A A

SPLICED SWITCH AND DISCONNECT STICKS &#; Available with fiberglass splice &#; Provides convenient storage - eliminates long one piece sticks CAT NO OVERALL LENGTH TIP SECTION BASE SECTION LBS 382 12&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 4.8 383 14&#; 1 1/2&#; x 6&#; 1 1/2&#; x 8&#; 5.6 384 16&#; 1 1/2&#; x 8&#; 1 1/2&#; x 8&#; 6.5 385 18&#; 1 1/2&#; x 8&#; 1 1/2&#; x 10&#; 7.4 386 20&#; 1 1/2&#; x 10&#; 1 1/2&#; x 10&#; 8.3 CAT NO OVERALL LENGTH TIP SECTION MIDDLE SECTION BASE SECTION LBS 522 18&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 8.3 523 20&#; 1 1/2&#; x 8&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 9.2 CAT NO OVERALL LENGTH TIP SECTION BASE SECTION LBS 388 12&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 4.6 389 14&#; 1 1/2&#; x 6&#; 1 1/2&#; x 8&#; 5.4 387 16&#; 1 1/2&#; x 8&#; 1 1/2&#; x 8&#; 6.3 391 18&#; 1 1/2&#; x 8&#; 1 1/2&#; x 10&#; 7.2 392 20&#; 1 1/2&#; x 10&#; 1 1/2&#; x 10&#; 8.1 CAT NO OVERALL LENGTH TIP SECTION MIDDLE SECTION BASE SECTION LBS 520 18&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 8.3 521 20&#; 1 1/2&#; x 8&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 9.2 TWO SECTION SWITCH STICK WITH FIBERGLASS SPLICE AND DISCONNECT HEAD THREE SECTION SWITCH STICK WITH FIBERGLASS SPLICE AND DISCONNECT HEAD TWO SECTION SWITCH STICK WITH FIBERGLASS SPLICE AND UNIVERSAL HEAD THREE SECTION STICK WITH FIBERGLASS SPLICE AND UNIVERSAL HEAD HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 108 Disconnect Head Universal Head

Wei Guang Product Page

SPLICED SWITCH AND DISCONNECT STICKS &#; Available with metal splice ferrules &#; Stepped sections allows for long lengths and maintains rigidity &#; Provides convenient storage - eliminates long one piece sticks CAT NO OVERALL LENGTH TIP SECTION BASE SECTION LBS 12&#; 1 1/4&#; x 6&#; 1 1/2&#; x 6&#; 6.2 14&#; 1 1/4&#; x 6&#; 1 1/2&#; x 8&#; 6.5 16&#; 1 1/4&#; x 8&#; 1 1/2&#; x 8&#; 7.5 18&#; 1 1/4&#; x 8&#; 1 1/2&#; x 10&#; 8.3 20&#; 1 1/4&#; x 10&#; 1 1/2&#; x 10&#; 8.8 CAT NO OVERALL LENGTH TIP SECTION BASE SECTION LBS 12&#; 1 1/4&#; X 6&#; 1 1/2&#; x 6&#; 5.1 14&#; 1 1/4&#; x 6&#; 1 1/2&#; x 8&#; 5.7 16&#; 1 1/4&#; x 8&#; 1 1/2&#; x 8&#; 6.2 18&#; 1 1/4&#; x 8&#; 1 1/2&#; x 10&#; 6.8 20&#; 1 1/4&#; x 10&#; 1 1/2&#; x 10&#; 7.3 CAT NO OVERALL LENGTH TIP SECTION MIDDLE SECTION BASE SECTION LBS 18&#; 1 1/4&#; x 6&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 9.9 20&#; 1 1/4&#; x 8&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 11.5 24&#; 1 1/2&#; x 8&#; 1 3/4&#; x 8&#; 1 3/4&#; x 8&#; 17.3 CAT NO OVERALL LENGTH TIP SECTION MIDDLE SECTION BASE SECTION LBS 18&#; 1 1/4&#; x 6&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 8.4 20&#; 1 1/4&#; x 8&#; 1 1/2&#; x 6&#; 1 1/2&#; x 6&#; 8.9 24&#; 1 1/2&#; x 8&#; 1 3/4&#; x 8&#; 1 3/4&#; x 8&#; 9.9 THREE SECTION STICK WITH METAL SPLICE AND UNIVERSAL HEAD TWO SECTION STICK WITH METAL SPLICE AND UNIVERSAL HEAD THREE SECTION SWITCH STICK WITH METAL SPLICE AND DISCONNECT HEAD TWO SECTION SWITCH STICK WITH METAL SPLICE AND DISCONNECT HEAD HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 109 Disconnect Head Universal Head

UNIVERSAL - ONE END ONLY 1 1/4&#; DIAMETER 1 1/2&#; DIAMETER FT CAT NO LBS CAT NO LBS 4 567-4 2.2 ----- ----- 6 567-6 3.0 ----- ----- 8 567-8 3.8 ----- ----- 10 567-10 4.6 469-10 4.9 12 567-12 5.4 469-12 6.9 14 ----- ----- 469-14 7.6 16 ----- ----- 469-16 8.5 20 ----- ----- 469-20 10.2 UNIVERSAL - BOTH ENDS 1 1/4&#; DIAMETER 1 1/2&#; DIAMETER FT CAT NO LBS CAT NO LBS 4 -4 2.8 ----- ----- 6 -6 3.3 ----- ----- 8 -8 4.1 -8 5.7 10 -10 5.0 -10 6.4 12 -12 5.8 -12 8.2 14 ----- ----- -14 10.0 TRIANGULAR SHAPE UNIVERSAL STICKS Lightweight, strong, and easy to use. FEATURES AND BENEFITS: &#; Foam Filled &#; Fluorescent green color for high visibility &#; Ergonomic design gives the operator a better gripping surface for control &#; All sticks include a hanger hook CAT NO DESCRIPTION LBS -6 6&#; DOUBLE END UNIVERSAL STICK 3.2 -8 8&#; DOUBLE END UNIVERSAL STICK 3.8 -10 10&#; DOUBLE END UNIVERSAL STICK 4.2 -12 12&#; DOUBLE END UNIVERSAL STICK 4.7 End view showing triangular shape UNIVERSAL HOT STICKS &#; Sticks with universal head adapts to all standard universal fit on tools (See the Hotstick Accessories section of our catalog) &#; All sticks include a hanger hook HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/19 110 -6 567-4 -4

UNIVERSAL TIE STICKS All sticks are equipped with combination hanger hook and tie wire assistant. FEATURES AND BENEFITS: &#; Rotary Blade - The rotary blade tie stick head produces a swivel action that enables wire to be moved greater distance without disengaging tool. &#; Rotary Prong - Use the rotary prong tie stick head for applying new tie wires with loops. Rotary action of prong provides ease and speed in operation. &#; Double Prong - Use the double prong tie stick head for installing and removing looped end ties. Double prongs are especially useful for bailing wire for safe removal. &#; Rotary Blade &#; Rotary Prong &#; Double Prong &#; Available in various combinations - see below. DOUBLE & SINGLE END STICKS CAT NO CAT NO 1 1/4&#; DIA x 6&#; 1 1/4&#; DIA x 8&#; ROTARY BLADE & UNIVERSAL HEAD -6 -8 ROTARY PRONG & UNIVERSAL HEAD -6 -8 DOUBLE PRONG & UNIVERSAL HEAD -6 -8 ROTARY BLADE - OPPOSITE END CAPPED -6 -8 ROTARY PRONG - OPPOSITE END CAPPED -6 -8 DOUBLE PRONG - OPPOSITE END CAPPED -6 -8 ROTARY PRONG & ROTARY BLADE -6 -8 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 111 -6 Rotary Blade Rotary Prong Double Prong

MULTI-PURPOSE HOLDING TOOL For holding slack conductors during sleeving. Provides positive control for shaping and bending jumpers and controlling conductors when cutting. FEATURES AND BENEFITS: &#; Excellent means of applying factory formed tie wires, armor rods, and securing captured hardware during crimping operation &#; Main fiberglass portion is 1&#; diameter &#; The 5/8&#; operating rod is designed to withstand high torque values &#; Foam filled to completely eliminate migration of contaminates and moisture RIGID HEAD CAT NO LENGTH CONDUCTOR CAPACITY LBS CASE 4&#; #6 to 1 1/16&#; 3.3 C- 6&#; #6 to 1 1/16&#; 3.8 C- 8&#; #6 to 1 1/16&#; 4.3 C- ADJUSTABLE HEAD CAT NO LENGTH CONDUCTOR CAPACITY LBS CASE 4&#; #6 to 1 1/16&#; 4.0 C- 6&#; #6 to 1 1/16&#; 4.5 C- 8&#; #6 to 1 1/16&#; 5.0 C- ADJUSTABLE HEAD All of the same features of the rigid head plus the convenience of adjustment from straight to 30 degrees both sides of center. This gives the lineman better control options from multiple positions. A universal joint on the operating rod allows smooth, effortless control of the gripping pressure. Angle adjustments are obtained easily by means of a spring loaded thumb screw. HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 112

HOT STICK BLANK POLES &#; Foam filled &#; Existing tools can be attached by cementing with epoxy adhesive 1 1/4&#; DIA BLANKS 1 1/2&#; DIA BLANKS 2&#; DIA BLANKS FT CAT NO LBS CAT NO LBS CAT NO LBS 4 464 1.2 534 2.0 ----- ----- 6 466 2.0 536 3.0 ----- ----- 8 468 2.5 538 4.1 638 5.1 10 2.9 5.3 6.3 12 3.3 6.5 7.5 14 3.8 7.6 8.6 16 ----- ----- 8.8 9.8 18 ----- ----- 10 11.0 20 ----- ----- 11.2 12.2 2 1/2&#; DIA BLANKS 3&#; DIA BLANKS FT CAT NO LBS CAT NO LBS 8 648 7.5 11.0 9 ----- ----- 12.5 10 9.5 14.0 11 ----- ----- 15.5 12 11.5 17.0 14 13.5 20.0 16 15.5 23.0 18 17.5 26.0 20 19.5 29.0 HOT STICK SPLICE FITTINGS &#; Hinge Splice &#; Rigid Splice CAT NO DESCRIPTION LBS -8 HINGE SPLICE FOR 1 1/4&#; DIAMETER STICK 1.0 CAT NO DESCRIPTION LBS METAL SPLICE TO FIT 1 1/4&#; to 1 1/4&#; 1.1 -5 METAL SPLICE TO FIT 1 1/2&#; to 1 1/4&#; 1.3 -1 METAL SPLICE TO FIT 1 1/2&#; to 1 1/2&#; 1.3 -7 METAL SPLICE TO FIT 1 3/4&#; to 1 1/2&#; 1.6 -6 METAL SPLICE TO FIT 1 3/4 to 1 3/4&#; 1.6 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 113 464 -8

BODY RESCUE HOOK STICK &#; 18&#; open hook mounted on a 1 1/4&#; O.D. fiberglass pole can be used for emergency rescue of injured personnel &#; The A can be used with any universal end sticks &#; The A can be used with any 1 1/4&#; spliced end sticks CAT NO DESCRIPTION LBS 848-1 RESCUE STICK WITH 6&#; POLE 7.5 848-2 RESCUE STICK WITH 8&#; POLE 8.0 848-3 RESCUE STICK WITH 10&#; POLE 9.0 A RESCUE HOOK WITH UNIVERSAL FITTING 5.1 A RESCUE HOOK WITH SPLICE END 5.6 SEVERE WEATHER STICK The severe weather tool is intended to improve safety in situations where the work must be performed, regardless of weather conditions. The tool provides extra protection from water forming a continuous path down the length of the tool. This will improve the dielectric properties of the tool when used in rain, fog, snow, or sleet. UNIVERSAL - ONE END ONLY 1 1/4&#; DIAMETER 1 1/2&#; DIAMETER FT CAT NO LBS CAT NO LBS 6 3.2 ----- ----- 8 4.0 ----- ----- 10 4.8 ----- ----- 12 5.6 7.1 14 ----- ----- 7.8 16 ----- ----- 8.7 18 ----- ----- 9.6 20 ----- ----- 10.4 CAT NO DESCRIPTION LBS SEVERE WEATHER TOOL 1 1/4&#; x 24&#; WITH UNIVERSAL ON BOTH ENDS 1.8 SEVERE WEATHER TOOL &#; Can adapt to any universal stick HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 05/23 114 848-1 A A TELESCOPIC BODY RESCUE HOOK STICK &#; Available in 6&#; and 8&#; extended lengths &#; Retracts for easy storage and shipping &#; 18&#; open hook mounted on telescopic fiberglass pole with fixed head, can be used for emergency rescue of injured personnel CAT NO DESCRIPTION RETRACTED LBS 848-6 6&#; TELESCOPIC BODY RESCUE STICK 40.5&#; 7.2 848-8 8&#; TELESCOPIC BODY RESCUE STICK 43.5&#; 8.0 848-6

HEAVY DUTY ONE PIECE FIBERGLASS PIKE POLES &#; One piece pole has a solid unicellular foam core &#; Supplied with reversible point for safety and storage &#; Supplied with a heavy duty base cap to protect butt end &#; Poles have a 2&#; diameter CAT NO LENGTH LBS -10 10&#; 7.5 -12 12&#; 8.7 -14 14&#; 9.9 -16 16&#; 11.1 -18 18&#; 12.3 -20 20 13.5 LIGHT - MEDIUM DUTY -O-POLE® FIBERGLASS PIKE POLE &#; Telescopic - retracts to 5&#; can be stored on service trucks &#; Telescopes to 17&#; &#; Tip section is foam filled &#; Supplied with heavy duty base cap to protect butt end &#; All sections easily disassembled for cleaning and repair CAT NO SECTIONS TIP DIAMETER BASE DIAMETER LBS CASE -17 4 1 1/8&#; 2&#; 4.0 C-30 SECTIONAL HEAVY DUTY FIBERGLASS PIKE POLES &#; Solves storage problems of one piece pike poles &#; Heavy duty plated steel splice keeps joined sections secure and rigid &#; Supplied with reversible point for safety and storage CAT NO DESCRIPTION LBS -6 6&#; TOP SECTION 7.1 -7 7&#; TOP SECTION 8.0 -8 8&#; TOP SECTION 8.9 -6 6&#; BASE SECTION 9.0 -7 7&#; BASE SECTION 9.9 -8 8&#; BASE SECTION 10.8 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 115 -17 -6 -6 -10

FIBERGLASS HANDLE CANT HOOK &#; High strength forged steel hook &#; 1 3/4&#; diameter fiberglass handle is easily gripped when wearing gloves &#; Supplied with heavy duty base cap to protect butt end &#; Protective metal sleeve on head eliminates wear &#; Knuckle guard to protect hand if hook swings back to pole CAT NO DESCRIPTION LBS CANT HOOK WITH 36&#; FIBERGLASS HANDLE 6.0 POLE CANT TOOL Fiberglass handle tool with heavy duty ratchet binder and nylon strap with special coating for turning fiberglass, concrete, metal and wood poles during installation. FEATURES AND BENEFITS: &#; Fiberglass Handle - 48&#; long x 2&#; diameter, has a solid foam core &#; Nylon Strap - special coated for gripping pole surface &#; Ratchet Binder - Heavy duty ratchet has extra wide handle for easy operation when wearing gloves &#; Neoprene Pad on aluminum base of tool prevents damage to poles &#; Two Way Turning - Poles can be turned in both positions without reinstalling the tool CAT NO DESCRIPTION LBS POLE CANT TOOL WITH HEAVY DUTY RATCHET BINDER AND 6&#; NYLON STRAP 10.0. -2 POLE CANT TOOL WITH HEAVY DUTY RATCHET BINDER AND 7&#; NYLON STRAP 10.0 -3 POLE CANT TOOL WITH HEAVY DUTY RATCHET BINDER AND 8&#; NYLON STRAP 10.2 -4 POLE CANT TOOL WITH HEAVY DUTY RATCHET BINDER AND 9&#; NYLON STRAP 10.2 -5 POLE CANT TOOL WITH HEAVY DUTY RATCHET BINDER AND 10&#; NYLON STRAP 10.4 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 02/23 116

ONE PIECE FIBERGLASS CABLE HANDLING TOOL &#; 4 1/2&#; diameter hook for easy hooking of cable &#; 1 1/4&#; diameter foam filled fiberglass shaft to prevent condensation &#; 1/2&#; diameter steel handle CAT NO DESCRIPTION LBS -01 CABLE TOOL WITH 2&#; FIBERGLASS SHAFT 2.0 -03 CABLE TOOL WITH 3&#; FIBERGLASS SHAFT 2.6 -04 CABLE TOOL WITH 4&#; FIBERGLASS SHAFT 3.1 -06 CABLE TOOL WITH 6&#; FIBERGLASS SHAFT 4.5 TWO PIECE CABLE HANDLING TOOL WITH FIBERGLASS HANDLE AND SPIRAL HOOKS &#; Spiral hooks provide positive grip on cables up to 2&#; diameter &#; 1 1/4&#; diameter foam filled fiberglass shaft to prevent condensation &#; 3/8&#; diameter steel handle CAT NO DESCRIPTION LBS 10-106 SPIRAL HOOK - HEAD ONLY WITH UNIVERSAL SPLINE 0.7 -8 2&#; FIBERGLASS SHAFT ONLY 1.8 -9 3&#; FIBERGLASS SHAFT ONLY 2.3 -10 4&#; FIBERGLASS SHAFT ONLY 2.8 -16 6&#; FIBERGLASS SHAFT ONLY 3.3 -18 8&#; FIBERGLASS SHAFT ONLY 3.8 INSULATED PROBE TOOLS &#; Probe tools are attached to 1 1/4&#; diameter fiberglass poles and are used for locating buried pipes and cables &#; 3/8&#; O.D. plated steel probe &#; Welded ring 3&#; from tip of tool allows easy penetration of most soils CAT NO DESCRIPTION LENGTH OF FIBERGLASS OVERALL LENGTH LBS -15 PROBE TOOL 12&#; 54&#; 2.5 -07 PROBE TOOL 24&#; 54&#; 2.6 SPIRAL HOOK TOOL How to use the spiral hook tool &#; Slide tool over both sides of cable &#; Rotate tool 90 degrees and cable becomes captive HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 01/21 117 -01 -15 10-106 -8

FIXED LENGTH SHOTGUN STICK WITH EXTERNAL OPERATING ROD CAT NO LENGTH LBS CASE 3&#; 3.6 ----- 4&#;6&#; 4.5 C- 6&#;6&#; 5.2 C- 8&#;6&#; 6.5 C- 10&#;6&#; 7.2 C- 12&#;6&#; 7.8 C- 14&#;6&#; 8.3 ----- FIXED LENGTH SHOTGUN STICK WITH INTERNAL OPERATING ROD CAT NO LENGTH LBS CASE 4&#;6&#; 4.1 C- 6&#;6&#; 4.9 C- 8&#;6&#; 5.7 C- 10&#;6&#; 6.4 C- 12&#;6&#; 7.1 C- FOLDING SHOTGUN STICK WITH EXTERNAL OPERATING ROD CAT NO LENGTH FOLDED LENGTH LBS CASE 6&#;6&#; 3&#;10&#; 7.0 01-015 8&#;6&#; 4&#;6&#; 8.2 01-015 10&#;6&#; 5&#;11&#; 9.3 01-017 12&#;6&#; 6&#;11&#; 10.4 01-017 UNIVERSAL FITTING ON BASE END - Add suffix -U to the catalog number. BOTTOM BREAK HOOK - Add suffix -X to the catalog number (not available on telescopic models). HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 05/23 118 UNIVERSAL OPTION BOTTOM BREAK HOOK OPTION FLUORESCENT HOOK OPTION &#; Add -F to part number

-O-POLE® SHOTGUN STICKS Telescopic shotgun sticks can collapse for storage and extend to the length needed. See chart below. CAT NO RETRACTED LENGTH OPERATING LENGTHS LBS CASE 5&#;1&#; 5&#;1&#;, 6&#; 6&#;, 8&#; 5.8 C-35 -80 5&#;1&#; 6&#;6&#;, 8&#; 5.8 C-35 -98 5&#;1&#; 8&#;2&#; 5.8 C-35 6 1/2&#; 6&#;6&#;, 8&#;, 9&#;6&#;, 11&#; 6.8 C- -97 6 1/2&#; 8&#;, 9&#;6&#;, 11&#; 6.8 C- 81-811 8&#; 8&#;, 9&#;6&#;, 11&#;, 12&#;6&#; 7.3 C- 81-814 8&#; 8&#;, 10&#;, 12&#;, 14&#; 7.8 C- 81- 9&#;10&#; 9&#;10&#;, 11&#;9&#;, 13&#;6&#;, 15&#;6&#;, 17&#;6&#; 9.5 C- UNIVERSAL OPTION &#; Add -U to part number BUTTON PROTECTOR &#; Add -BP to part number &#; Helps prevent button from being accidentally depressed HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 01/21 119 FLUORESCENT HOOK OPTION &#; Add -F to part number

SECTIONAL SHOTGUN STICK COMPLETE WITH DETACHABLE HEAD ASSEMBLY SECTIONS CAN BE ADDED FOR LONGER LENGTHS CAT NO LENGTH OF BASE SECTION OVERALL LENGTH LBS 81-704 4&#; 5&#; 4.9 81-706 6&#; 7&#; 5.6 81-708 8&#; 9&#; 9.5 81-710 10&#; 11&#; 11.3 EXTENSION SECTIONS USE WITH SINGLE SECTION STICKS TO MAKE LONGER LENGTHS CAT NO LENGTH LBS 81-604 4&#; 2.5 81-606 6&#; 3.5 81-608 8&#; 5.0 81-610 10&#; 6.0 INSULATED HEAD ASSEMBLY FOR USE WITH ALL SECTIONAL SHOTGUN STICK BASE AND EXTENSION SECTIONS CAT NO DESCRIPTION LBS 81--5 INSULATED HEAD ASSEMBLY 1.5 CARRY CASES FOR SECTIONAL SHOTGUN STICKS 4&#; LENGTH 6&#; LENGTH 8&#; LENGTH 10&#; LENGTH CAT NO NUMBER OF POCKETS CAT NO NUMBER OF POCKETS CAT NO NUMBER OF POCKETS CAT NO NUMBER OF POCKETS 01-524 2 01-526 2 01-528 2 01-529 2 01-534 3 01-536 3 01-538 3 01-539 3 01-544 4 01-546 4 01-554 5 01-556 5 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 01/21 120 BASE SECTIONS CAT NO LENGTH LBS A 4&#; 1.0 A 6&#; 2.0 A 8&#; 3.0 A 10&#; 4.0 SECTIONAL SHOTGUN STICK PACKAGE COMPLETE WITH BASE, HEAD, INTERMEDIATE SECTIONS AND CARRY CASE CAT NO LENGTH OF SECTIONS NUMBER OF SECTIONS IN PACKAGE OPERATING LENGTHS LBS 81-524 4&#; 2 5&#; - 9&#; 9.4 81-534 4&#; 3 5&#; - 9&#; - 13&#; 11.4 81-544 4&#; 4 5&#; - 9&#; - 13&#; - 17&#; 15.7 81-526 6&#; 2 7&#; - 13&#; 11.2 81-536 6&#; 3 7&#; - 13&#; - 19&#; 15.0 81-546 6&#; 4 7&#; - 13&#; - 19&#; - 25&#; 18.2 81-704 81-604 81--5 ADDTIONAL OPTIONS AVAILABLE - See Pages 118 and 119

TREE TRIMMING KIT Open the tool kit bag and you have your choice of tree trimming tools in the length you need, all in a convenient heavy duty vinyl tool bag that offers long wear and maximum protection for the tools. Kits are available with round or square pole sections in four or six foot lengths. Each kit contains the following items: 1 Pruner Head Assembly - 2&#; 4 Extension Sections with 1 Base Cap 1 Universal Pruning Saw (A) 1 Saw Handle (A) 1 Saw Scabbard (A) 1 Universal Adapter (A) 1 Universal &#;S&#; Hook for pushing or pulling tree limbs (P) 1 Multiple Pocket Vinyl Tool Bag (01-020) ROUND POLES 1 1/4&#; DIAMETER SQUARE POLES 1 1/4&#; LENGTH OF SECTIONS CAT NO LBS LENGTH OF SECTIONS CAT NO LBS 4&#; 15 4&#; 15 6&#; 19 6&#; 19 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 121

HOTSTICKS AND CUTTERS SECTIONAL TREE TRIMMERS - SQUARE POLES CUTTER HEAD EXTENSION BASE FT CAT NO LBS CAT NO LBS CAT NO LBS 1 2.0 ----- ----- ----- ----- 2 2.4 ----- ----- ----- ----- 4 3.2 1.5 -2 1.6 6 3.9 2.2 -2 2.3 8 4.7 3.0 -2 3.1 TREE TRIMMERS Tree Trimming Equipment for the professional tree trimmer. FEATURES AND BENEFITS: &#; Two styles available 1 1/4&#; O.D. Round and 1 1/4&#; Square fiberglass poles &#; Cutter heads are machined from drop forged steel and have a 1 1/2&#; diameter cutting capability &#; All Cutter heads have a splined universal attachment for a pruning saw &#; Double pulleys give the operator a 3-1 mechanical advantage &#; Can be used with Pruner Rope Insulator for additional protection near high voltage lines (See Page 124) SINGLE POLE TREE TRIMMERS ROUND POLES SQUARE POLES FT CAT NO LBS FT CAT NO LBS 10 5.0 10 5.0. 12 6.0 12 5.5 14 6.5 14 6.5 16 7.0 16 7.0 UNIVERSALADAPTER CAT NO DESCRIPTION LBS A UNIVERSALADAPTER FOR ROUND POLE 0.4 A UNIVERSALADAPTER FOR SQUARE POLE 0.5 SECTIONAL TREE TRIMMERS - ROUND POLES CUTTER HEAD EXTENSION BASE FT CAT NO LBS CAT NO LBS CAT NO LBS 1 2.0 ----- ----- ----- ----- 2 3.2 ----- ----- ----- ----- 4 3.9 546-4 1.4 552-4 1.5 6 4.6 546-6 2.1 552-6 2.0 8 5.4 546-8 2.8 552-8 2.7 10 6.1 546-10 3.2 552-10 3.5 POLE PRUNING SAWWITH ADAPTERS FOR 1 1/4&#; DIAMETER ROUND POLES FOR 1 1/4&#; SQUARE POLES CAT NO LBS CAT NO LBS 1.75 1.5 HOT STICKS AND CUTTERS : 269.945. &#; Fax: 269.945. &#; www.hfgp.com &#; : PO Box 218, W Green Street, Hastings, Michigan - These products are for trained professionals only. 07/18 122 A

Made with FlippingBook

RkJQdWJsaXNoZXIy MTkwMTQ=

Are you interested in learning more about Telescopic Hot Stick? Contact us today to secure an expert consultation!